We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Panasonic ET-SLMP128 projector lamp module with 330W Ushio NSHA bulb in housing

Panasonic

Panasonic ET-SLMP128 330W Projector Lamp

SKU CH-B5C9-G9XC4

A ready-to-install 330 W projector lamp module with 2,000 to 3,000 hours rated life

  • TypeProjector Lamp
  • Wattage330W
  • Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
  • Genuine Ushio NSHA bulb ensures reliable ignition and colour accuracy
  • 330W output matches original projector specification for consistent brightness
  • 2,000 hours normal or 3,000 hours economy mode extends replacement interval
  • Pre-assembled housing allows tool-free installation in minutes
  • ISO 9001 manufacturing quality checks verify beam performance and run-time

Ready-to-Install 330 W Lamp Module

The Panasonic ET-SLMP128 is a complete replacement lamp module for compatible Sanyo projectors. It ships with a new 330 W Ushio NSHA bulb already seated in its housing, so no separate bulb handling is required. The unit is supplied new and manufactured to ISO 9001 quality standards. It is intended for users who need a direct, original-specification replacement without additional assembly.

Pre-Assembled Housing and OEM-Grade Build

Because the bulb and housing arrive fully assembled, installation is a simple matter of removing the old module and inserting the new one. The lamp uses a genuine NSHA 330 W bulb sourced from established OEM manufacturers such as Ushio, Philips or Osram. Each unit undergoes checks for beam performance, ignition voltage, connections and run-time before dispatch. The construction follows the same mechanical interface as the original lamp supplied with the projector.

Rated Life and Compatibility Check

The lamp is rated for 2,000 hours in normal mode and 3,000 hours in economy mode. Before ordering, confirm that your projector accepts the ET-SLMP128 or POA-LMP128 part number, as several Sanyo models share similar but distinct lamp modules. Verify the wetting requirement of 330 W matches the projector's specification. This module will not suit projectors that require a different wattage, connector layout or physical form factor.

Highlights

  • Genuine Ushio NSHA bulb ensures reliable ignition and colour accuracy
  • 330W output matches original projector specification for consistent brightness
  • 2,000 hours normal or 3,000 hours economy mode extends replacement interval
  • Pre-assembled housing allows tool-free installation in minutes
  • ISO 9001 manufacturing quality checks verify beam performance and run-time

Specifications

BrandSanyo
TypeProjector Lamp
Wattage330W
Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.

Questions about this item

What projector interface does the ET-SLMP128 lamp module use and what wattage does it draw?

The lamp module is a direct replacement for the Sanyo POA-LMP128 housing and draws 330W when operating in the projector.

What physical housing does the ET-SLMP128 lamp require to fit correctly?

It ships as a fully assembled bulb inside the original housing, matching the POA-LMP128 form factor for Sanyo projectors.

How is the ET-SLMP128 lamp installed and which step do users often miss?

Power off and cool the projector, remove the lamp cover, swap the complete housing module, replace the cover, then reset the lamp timer in the menu so the 2,000 or 3,000 hour counter starts correctly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.