Panasonic
Panasonic ET-LAV100 projector lamp 245W
A 245W replacement projector lamp module with bulb and housing ready for installation, offering 3000 hours normal or 5000 hours economy life
- TypeProjector Lamp
- Wattage245W
- Lamp Life3,000 (Normal) - 5,000 (Economy) Hrs.
- Ready to install with pre-assembled housing
- Bright 245 watt UHM lamp delivers clear images
- Lasts 3000 hours normal or 5000 hours economy mode
- Manufactured to ISO 9001 quality standards
- Genuine OEM bulb from Philips Osram Ushio Phoenix Iwasaki Matsushita
Ready-to-install replacement lamp
This Panasonic ET-LAV100 module arrives as a fully assembled 245W bulb and housing, removing the need for separate component handling during installation. It is designed for owners of compatible Panasonic projectors who want a direct OEM-standard replacement without additional assembly steps.
245W power draw and rated hours
The lamp operates at 245W and provides 3000 hours of life in normal mode or 5000 hours in economy mode, giving a clear expectation for replacement intervals. Typical projector cooling systems manage the thermal load at this wattage, and the lamp meets ISO9001 manufacturing standards for ignition, voltage and run-time consistency.
Pre-fitted housing speeds up swap
Because the bulb is already seated in its housing, the module drops straight into the projector without aligning bare lamps or handling fragile reflectors. This reduces the risk of contamination or misalignment that can affect beam performance, and each unit is checked for appearance and connections before shipping.
Highlights
- Ready to install with pre-assembled housing
- Bright 245 watt UHM lamp delivers clear images
- Lasts 3000 hours normal or 5000 hours economy mode
- Manufactured to ISO 9001 quality standards
- Genuine OEM bulb from Philips Osram Ushio Phoenix Iwasaki Matsushita
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 245W |
| Lamp Life | 3,000 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
How do I install the ET-LAV100 lamp module and what step is often missed?
Power off and unplug the projector, let it cool completely, remove the lamp cover screw, pull the old module out by its handle, insert the new ET-LAV100 assembly until it seats firmly, replace the cover screw, then reset the lamp-hour counter in the projector menu — skipping the reset is the step most people forget.
What maintenance or replacement will this 245 W UHM lamp need later?
The lamp itself is the only consumable; after 3,000 hours in Normal mode or 5,000 hours in Economy mode the brightness drops to roughly half and the module must be replaced — no separate filter or bulb-only change is required for this housed unit.
What limit appears first during a long presentation with this 245 W lamp?
Sustained use builds heat inside the projector; the thermal protection circuit will dim or shut down the lamp before the 3,000-hour Normal-mode rating is reached if ventilation is restricted or the intake filter is clogged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



