Panasonic
Panasonic ET-LAL500 OEM Replacement Projector Lamp 230W
A ready-to-install 230 W projector lamp module rated for 5 000 hours normal or 10 000 hours economy use
- TypeProjector Lamp
- Wattage230W
- Lamp Life5,000 Hrs. (Normal) - 10,000 Hrs. (Economy)
- Ready to install with pre-assembled bulb and housing
- 230W UHM lamp delivers consistent brightness
- 5,000 hours normal life reduces replacement frequency
- 10,000 hours economy mode extends usable lifespan
- Manufactured to ISO 9001 quality standards
Direct Replacement Module
The Panasonic ET-LAL500 is a new 230W projector lamp module that arrives with the Ushio UHM bulb already seated in its housing. It is built for owners of compatible Panasonic projectors who need a factory-specification light source without separate assembly.
Restores Original Brightness
This unit replaces a lamp that has reached the end of its rated 5,000-hour normal life or 10,000-hour economy life. The upgrade is worth it when the projected image has dimmed noticeably, colour fidelity has drifted, or the projector signals that the lamp counter has expired.
Tool-Free Housing Swap
Because the bulb comes pre-installed in the housing, installation typically requires only opening the projector's lamp door, releasing the retaining latch, and sliding the module into place. The most common issue is forgetting to reset the internal lamp timer after fitting the new module, which leaves the replacement warning active.
Highlights
- Ready to install with pre-assembled bulb and housing
- 230W UHM lamp delivers consistent brightness
- 5,000 hours normal life reduces replacement frequency
- 10,000 hours economy mode extends usable lifespan
- Manufactured to ISO 9001 quality standards
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 230W |
| Lamp Life | 5,000 Hrs. (Normal) - 10,000 Hrs. (Economy) |
Questions about this item
What projector models does the ET-LAL500 lamp module fit?
The ET-LAL500 is a direct replacement module for Panasonic projectors that specify this part number; it ships as a complete housing with a 230W Ushio UHM bulb already installed.
Which step is most often missed when installing the ET-LAL500 lamp module?
After sliding the new module into the projector and securing the retaining screws, the lamp-hour counter in the projector menu must be reset to zero so the 5,000-hour normal or 10,000-hour economy timers track correctly.
When will the ET-LAL500 lamp need replacement and what should be used?
Expect to replace the module after roughly 5,000 hours in normal mode or 10,000 hours in economy mode; swap it for another ET-LAL500 unit with a 230W UHM bulb to maintain original brightness and fit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



