We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Panasonic ET-LAL400-A DLP replacement lamp module in housing

Panasonic

Panasonic ET-LAL400-A DLP Replacement Lamp

SKU CH-WKDZ-AFS5X

Replacement lamp and housing for Panasonic DLP projectors, supplied new with 90-day warranty

  • TypeProject Lamp
  • Weight0.9500
  • Genuine AL Series lamp ensures reliable projection performance
  • Lamp-and-housing module simplifies installation for Panasonic projectors
  • 90-day warranty provides confidence in product quality
  • Compatible with multiple Panasonic part codes including ET-LAL400
  • Lightweight .9500 kg design eases handling and mounting

Panasonic DLP Replacement Lamp Module

This new aftermarket lamp and housing assembly is built for Panasonic projectors that use the ET-LAL400 part code. It arrives as a complete module so installation is a simple swap without handling a bare bulb. The unit weighs .9500 and ships as a single pack. Buyers receive a 90-day warranty on the component.

Suitable for owners of compatible Panasonic units

The lamp fits models such as the Eco WX32N-LAMP, LC-WAU200-LAMP and BD-470-LAMP as well as ET-LAL400C and ET-LAL400-USH variants. It is not intended for projectors that require a different part code or a bare lamp without housing. Users needing higher brightness or a different form factor should verify their service manual before ordering.

ET-LAL400 part-code compatibility

The decisive specification is the ET-LAL400 part code printed on the original module or listed in the projector manual. If the service documentation calls for this exact code the lamp will seat correctly and strike reliably. A mismatched code means the connector or dimensions will not align.

Highlights

  • Genuine AL Series lamp ensures reliable projection performance
  • Lamp-and-housing module simplifies installation for Panasonic projectors
  • 90-day warranty provides confidence in product quality
  • Compatible with multiple Panasonic part codes including ET-LAL400
  • Lightweight .9500 kg design eases handling and mounting

Specifications

BrandAdvanced Lamps
ModelET-LAL400-A
Part NumberET-LAL400-A
TypeProject Lamp
Weight0.9500

Questions about this item

How do I install the ET-LAL400 lamp housing and what step is often missed?

Power off the projector and let it cool completely, then remove the lamp cover, loosen the retaining screws, slide out the old module, insert the new ET-LAL400 housing until it seats firmly, re-tighten the screws, replace the cover, and reset the lamp timer in the menu — the timer reset is the step most people forget.

What maintenance or replacement will the ET-LAL400 need later?

The lamp itself is a consumable; after its rated hours the brightness will drop and the module must be replaced again, while the air filters should be cleaned regularly to prevent overheating.

What limit appears first during sustained use of the ET-LAL400?

Lamp brightness declines gradually with accumulated hours, and the 90-day warranty period ends, so reduced light output is the first practical limit you will notice.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.