Panasonic
Panasonic AFP7DA4H FP7 4-Channel 250mA Analog DIN Rail Output Unit
Four-channel analog DIN-rail output unit with 250 mA current rating, 0–20 mA range and 25 µs per-channel conversion speed
- Four analog output channels suit multi-loop control
- 0–20 mA current range covers standard industrial signals
- 250 mA rating drives field devices directly
- 25 µs per channel conversion keeps loops responsive
- DIN rail mounting fits standard cabinet layouts
4-Channel Analog Output Unit
The Panasonic AFP7DA4H is a DIN-rail output unit from the FP7 series that delivers four analog channels rated at 250 mA each. It provides a current output range of 0 to 20 mA with a load resistance of 500 Ohm or less and a voltage output capability of 10 mA at 0.5 Ohm impedance or less. Conversion speed is 25 micro s per channel for both modes.
Replaces Single-Channel or Lower-Current Modules
Upgrading makes sense when a machine needs four independent analog loops in the same rail footprint or when the 250 mA per channel rating exceeds the limit of existing units. The jump is worth it if the application demands the combined current density and the 25 micro s conversion cycle without adding extra modules.
Fits Standard DIN-Rail Cabinets
The unit mounts directly on a DIN rail and requires a supply and wiring scheme compatible with the stated voltage and current output specifications. It frees panel space by consolidating four analog outputs into one housing while the low output impedance and defined load limits simplify loop design for current or voltage devices.
Highlights
- Four analog output channels suit multi-loop control
- 0–20 mA current range covers standard industrial signals
- 250 mA rating drives field devices directly
- 25 µs per channel conversion keeps loops responsive
- DIN rail mounting fits standard cabinet layouts
Specifications
No published specifications for this item yet.
Questions about this item
What DIN rail width does the AFP7DA4H mount on?
The unit is designed for standard DIN rail mounting used in control cabinets.
Which wiring step is most often missed when installing the four analog channels?
Each channel needs its own load resistance of 500 Ohm or less for current output or the voltage output will not stay within the 10 mA limit.
When should the output unit be replaced if the conversion speed drifts?
If the 25 micro s per channel conversion time can no longer be met, the module should be swapped out.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
