PAGUO PIGGYBACKEXTENSION 14AWG 3FT IP67 20A 125V Inline Switch Cord
Three-foot 14 AWG outdoor extension cord with an IP67 waterproof inline switch rated 20 A at 125 V
- FeaturesThis 3FT power extension cord is made by PAGUO and features
- Turn devices fully off with inline switch
- IP67 waterproof rating suits outdoor use
- 14 AWG copper cable handles 20 A at 125 V
- Flame-retardant PA66 housing rated for 10 000 cycles
- Piggyback plug adds switched outlet without unplugging
14AWG inline switch cord
This 3 ft extension cord from PAGUO integrates an IP67-rated on/off rocker switch with a red LED into a 14 AWG cable. It carries UL listing and is rated for 20 A at 125 V AC/DC, with a 16 A rating at 250 V. The piggyback plug lets you keep the outlet free while adding switched control. A flame-retardant PA66 housing and 100 % copper conductors complete the build.
Indoor and outdoor loads up to 20 A
The switch suits lamps, fans, LED lighting and other appliances that benefit from a weatherproof inline control rated for 10 000 cycles. Buyers who need a longer reach than three feet or a higher current rating than 20 A should look at a different solution. The fixed cable length and single switched outlet also limit use where multiple switched sockets are required.
20 A headroom for heavy-duty appliances
At 14 AWG the cord comfortably handles high-draw equipment up to the full 20 A rating at 125 V, while the IP67 seal protects the switch in wet environments. The 16 A limit at 250 V defines the upper boundary for international voltage use. No additional capacity beyond the stated ratings is available.
Highlights
- Turn devices fully off with inline switch
- IP67 waterproof rating suits outdoor use
- 14 AWG copper cable handles 20 A at 125 V
- Flame-retardant PA66 housing rated for 10 000 cycles
- Piggyback plug adds switched outlet without unplugging
Specifications
| Brand | PAGUO |
|---|---|
| Model | PIGGYBACKEXTENSION |
| Features | This 3FT power extension cord is made by PAGUO and features a style with material. It supports a voltage of 110 volts and an input current of 20 amps. The cable is Black in color and is UL listed. It comes with a Male-to-Female connector and does not require batteries. |
Questions about this item
What voltage and amperage rating must my outlet and device support for this 14AWG cord?
The cord is rated for 20A at 125V AC/DC and 16A at 250V AC, so both the supply and the connected load must operate within those limits.
Can I plug this inline switch into an existing 16AWG extension lead without creating a bottleneck?
Yes, the 14AWG cable is heavier than 16AWG, so it will not restrict current flow; the overall capacity will still be limited by the 16AWG lead’s lower rating.
How do I confirm the IP67 switch is functioning correctly after installation?
The red LED rocker illuminates when the switch is in the ON position, providing immediate visual confirmation that power is reaching the outlet.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



