Pagaloce SATA Cable III 18 Inch 2-Pack 6Gbps Male-to-Male Black
Two 18-inch SATA III cables with locking 7-pin male connectors deliver 6Gbps data transfer for HDDs, SSDs and optical drives
- TypeSATA
- ColorBlack
- Connector DetailSata III
- Terminal GenderMale-to-Male
- Speed6 gigabits_per_second
- FeaturesData Transfer
- SATA III 6 Gbps transfer speed backed by 6Gbps specification
- Two 18-inch cables included for multiple drive connections
- Locking latch connectors secure both ends against accidental disconnect
- Tinned copper conductors with shielding reduce electromagnetic interference
- Male-to-male 7-pin straight connectors fit HDD, SSD and optical drives
Two 18-inch SATA III cables for storage upgrades
This pack contains two 18-inch SATA III cables with straight 7-pin male connectors and locking latches. They connect motherboards or host controllers to internal hard drives, SSDs and optical drives. Each cable supports 6 Gbps data transfer and is backward compatible with earlier SATA revisions. The black jacket suits standard PC and gaming-console builds.
Tinned copper conductors
Conductors use tinned-plated pure copper for durability and a built-in shielding layer to reduce electromagnetic interference. Locking latches on both ends prevent accidental disconnection during moves or vibration. Straight-angle plugs fit tight drive bays and standard motherboard headers without adapters. Indoor-rated PVC jacket resists everyday handling.
6 Gbps ceiling decides if the drive can saturate
The 6 Gbps specification is the single figure that determines whether a SATA SSD or hard drive can run at its rated throughput. Drives limited to 3 Gbps will work but cannot exceed their own ceiling. Builders needing power delivery or longer reach must source separate power cables or different lengths.
Highlights
- SATA III 6 Gbps transfer speed backed by 6Gbps specification
- Two 18-inch cables included for multiple drive connections
- Locking latch connectors secure both ends against accidental disconnect
- Tinned copper conductors with shielding reduce electromagnetic interference
- Male-to-male 7-pin straight connectors fit HDD, SSD and optical drives
Specifications
| Brand | Pagaloce |
|---|---|
| Type | SATA |
| Color | Black |
| Connector Detail | Sata III |
| Terminal Gender | Male-to-Male |
| Speed | 6 gigabits_per_second |
| Features | Data Transfer |
Questions about this item
What SATA standard does this cable use and what is its maximum data rate?
It uses the SATA III standard with a maximum data transfer rate of 6 Gbps and is backward compatible with SATA I and SATA II devices.
What physical connectors and cable length are included in this two-pack?
Each pack contains two 18-inch black cables with 7-pin straight male-to-male connectors featuring locking latches for secure attachment.
How do I install these cables and what common mistake should I avoid?
Align the 7-pin connector with the motherboard or drive port, press firmly until the locking latch clicks, and remember this cable carries only data so a separate SATA power cable is still required for each drive.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



