We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel beam clamp, adjustable jaws, 15 in wide, 2000 lb capacity

Oz Lifting Products

Oz Lifting Products OZ1BCA Beam Clamp 2000 lb

SKU CH-XM6N-5Y9Z9

Steel beam clamp adjusts from 3 to 9 in jaw opening for 2000 lb working load limit

  • 2000 lb working load limit for heavy lifting
  • Steel construction resists wear on job sites
  • Adjusts from 3 in to 9 in beam width
  • Fits angled, flat and tapered flange profiles
  • 15 in overall width spans broad beams

Beam clamp for structural steel

The Oz Lifting Products OZ1BCA is a steel beam clamp rated for a 2000 lb working load limit. It attaches to angled, flat or tapered flanges and mounts on the bottom, bottom-centre or top of the beam. The clamp suits rigging points where a fixed anchor is required on structural steelwork.

Manual operation with no power needed

The clamp is operated by hand using a threaded shaft that tightens against the flange. No hydraulic, pneumatic or electric supply is involved, so there is no motor noise, heat or power draw to consider. The mechanism relies on mechanical friction and the steel frame to hold the rated load.

Steel construction with 15 in overall width

The body is made from steel and measures 15 in wide overall, with a 5 3/4 in height and 2 1/2 in depth. Jaw openings adjust from 3 in to 9 in to fit beam widths and thicknesses within that range. A 3/4 in attachment diameter accepts standard rigging hardware such as shackles or hooks.

Highlights

  • 2000 lb working load limit for heavy lifting
  • Steel construction resists wear on job sites
  • Adjusts from 3 in to 9 in beam width
  • Fits angled, flat and tapered flange profiles
  • 15 in overall width spans broad beams

Specifications

BrandOz Lifting Products

Questions about this item

How do I attach the clamp to a beam and what step do people often miss?

Position the jaws around the flange between 3 in and 9 in wide up to 7/8 in thick then tighten the shaft until the 3/4 in attachment diameter seats fully.

What part will need inspection or replacement after repeated lifts?

Check the steel jaw surfaces and the threaded shaft for wear or deformation before each use.

What is the first limit reached during sustained loading?

The 2000 lb working load limit must not be exceeded at any time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.