We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tan fiberglass pipe insulation tube with slit adhesive flap

Owens Corning

Owens Corning 200247 1-1/2" x 3 ft. Pipe Insulation, 1-1/2" Wall

SKU CH-FW3J-FCXQG MPN 200247

Fiberglass pipe insulation tube with ASJ facing fits 1-1/2 inch pipe, 3 ft length, R-10.4, plenum rated, 0 to 1000°F

  • TypeDrain Components
  • MaterialHAWA
  • ColorTan
  • R-value 10.4 resists heat loss effectively
  • Withstands temperatures up to 1,000°F safely
  • Slit design with adhesive flap speeds installation
  • Flame spread 25 and smoke developed 50 meet plenum rating
  • Fiberglass construction with ASJ facing ensures durability

Insulation for 1-1/2 inch pipe

Owens Corning 200247 is a fiberglass pipe insulation tube designed for 1-1/2 inch piping systems. The slit tube with adhesive flap allows straightforward installation on hot or cold lines. It serves residential and commercial plumbing projects needing thermal protection.

Temperature range and safety ratings

The insulation operates from 0 degrees F up to 1,000 degrees F with an R-value of 10.4. ASJ facing provides a vapor barrier while the plenum rating confirms suitability for air-handling spaces. Flame spread index is 25 and smoke developed index is 50.

Upgrade from uninsulated or thinner wrap

This product replaces bare pipe or lower R-value wrap when energy code requires R-10.4 or when condensation control is needed in plenum areas. The jump is worth it when the 1-1/2 inch wall thickness fits the available clearance and the service temperature stays within the 0 to 1,000 degrees F range.

Highlights

  • R-value 10.4 resists heat loss effectively
  • Withstands temperatures up to 1,000°F safely
  • Slit design with adhesive flap speeds installation
  • Flame spread 25 and smoke developed 50 meet plenum rating
  • Fiberglass construction with ASJ facing ensures durability

Specifications

TypeDrain Components
MaterialHAWA
ColorTan
BrandOwens Corning
Model200247

Questions about this item

How do I install the slit-with-adhesive-and-flap tube on a 1-1/2 in pipe without leaving gaps?

Open the slit, wrap the tube around the pipe, press the adhesive flap firmly along the full 3 ft length, then seal the butt joints with matching ASJ tape so vapour cannot reach the fiberglass core.

What maintenance will this fiberglass pipe insulation need over its service life?

Inspect the ASJ facing and adhesive seams annually; replace any section where the facing is torn, the adhesive has released, or the material has been wetted, because saturated fiberglass loses its R 10.4 value.

At what temperature does the insulation reach its rated limit during sustained high-heat service?

The product is rated for continuous exposure up to 1,000 Degrees F; beyond that the ASJ facing and adhesive can degrade, so it should not be used on pipes that exceed this temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.