We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connector

OWC

OWC 8GB DDR4 2133MHz CL15 1.2V 260pin SODIMM HP Envy 15-as memory upgrade

SKU CH-J9N1-H23QT

8GB DDR4 SODIMM at 2133 MHz CL15, 1.2 V, validated for HP Envy 15-as series laptops

  • Capacity8GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts multitasking with 8GB DDR4 2133MHz CL15 memory
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Low 1.2V voltage reduces power draw and heat
  • 260-pin SODIMM fits HP Envy 15-as series laptops
  • Unbuffered non-ECC design ensures broad system compatibility

HP Envy 15-as DDR4 SODIMM upgrade

This 8 GB DDR4 module is built for the HP Envy 15-as series, including the 15-as000ns, 15-as001na, 15-as001nf, 15-as001ng and 15-as001no models. It adds memory capacity to those specific laptops without requiring any configuration changes. Buyers with other notebook models or desktop systems cannot use this module.

260-pin unbuffered non-ECC build

The stick uses a standard 260-pin SO-DIMM edge connector with no heat spreader, so it fits the slim memory slots found in the listed Envy chassis. Unbuffered non-ECC organisation means it works directly with the laptop's consumer memory controller; there is no register or error-correction circuitry to interfere with the platform.

DDR4 2133 CL15 1.2 V limits

The JEDEC PC4-17000 rating sets the data rate at 2133 MT/s with a CAS latency of 15 at 1.2 V. Systems that only support lower DDR4 speeds will down-clock the module, while platforms needing higher bandwidth or lower latency will not reach those targets with this part.

Highlights

  • Boosts multitasking with 8GB DDR4 2133MHz CL15 memory
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Low 1.2V voltage reduces power draw and heat
  • 260-pin SODIMM fits HP Envy 15-as series laptops
  • Unbuffered non-ECC design ensures broad system compatibility

Specifications

BrandOWC
Part Number2S1D42R808GB
Capacity8GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY 15-as000ns
HP ENVY 15-as001na
HP ENVY 15-as001nf
HP ENVY 15-as001ng
HP ENVY 15-as001no

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the DDR4 2133MHz CL15 rating cap the memory speed at 2133MHz in my HP Envy 15-as?

Yes, this module runs at DDR4 2133 (PC4-17000) with CL15 timing; the laptop memory controller will not exceed that frequency.

What physical slot does the 260-pin SODIMM need to fit in the HP Envy 15-as series?

It requires a standard 260-pin DDR4 SODIMM slot; the Envy 15-as models listed use that exact form factor.

How do I install the module and which step do people often miss?

Power off, unplug, open the bottom panel, align the notch on the 260-pin edge connector, press firmly until the side clips click, then reassemble — the missed step is pressing hard enough to engage both clips.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.