OWC
OWC 8GB DDR3 1866MHz CL13 1.35V 204-pin laptop RAM (2x4GB)
8GB DDR3 kit running at 1866MHz CL13 on 1.35V for laptops and mini PCs
- Capacity8GB (2 x 4GB)
- Voltage1.35V
- Dual-channel 8 GB kit boosts multitasking with two matched 4 GB modules
- 1866 MHz DDR3 speed delivers responsive performance for everyday workloads
- Low 1.35 V operation reduces power draw and heat in portable systems
- 204-pin SO-DIMM form factor fits laptops mini PCs and NAS devices
- Non-ECC CL13 timing provides stable operation without error-correction overhead
Dual-channel DDR3 kit for laptop upgrades
This OWC kit provides 8 GB of DDR3 memory in a matched pair of 4 GB SO-DIMMs. It targets owners of compatible laptops, mini PCs or NAS units that require 204-pin modules running at 1.35 V. The non-ECC design suits standard consumer platforms without error-correction overhead.
Steady throughput at CL13 1866 MHz
Rated at PC3L-14900 with a CAS latency of 13, the modules maintain their specified frequency during extended workloads rather than throttling after a brief burst. The low-voltage operation helps sustain performance within the thermal envelope of compact chassis where airflow is limited.
Low-profile SO-DIMM build for tight slots
Each stick uses a standard 204-pin edge connector and a slim profile that fits the narrow DIMM sockets found in ultrabooks and small-form-factor systems. The 1.35 V signalling reduces power draw compared with 1.5 V alternatives, easing strain on the memory controller during daily use.
Highlights
- Dual-channel 8 GB kit boosts multitasking with two matched 4 GB modules
- 1866 MHz DDR3 speed delivers responsive performance for everyday workloads
- Low 1.35 V operation reduces power draw and heat in portable systems
- 204-pin SO-DIMM form factor fits laptops mini PCs and NAS devices
- Non-ECC CL13 timing provides stable operation without error-correction overhead
Specifications
| Brand | Other World Computing |
|---|---|
| Capacity | 8GB (2 x 4GB) |
| Voltage | 1.35V |
Questions about this item
Does the 1.35V DDR3 kit run cooler than standard 1.5V modules during long sessions?
The 1.35V PC3L-14900 modules draw less power than standard 1.5V DDR3, so they generate less heat during all-day use.
What slot type must my laptop or mini PC provide for these 204-pin SO-DIMMs?
The kit uses the 204-pin SO-DIMM form factor and requires a DDR3-compatible slot.
Will the CL13 1866MHz sticks down-clock automatically in an older CL11 system?
Yes, the non-ECC modules will negotiate the highest common speed and latency supported by the platform.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



