OWC
OWC 4S8D51R816GB 16GB DDR5 4800 CL40 1.1V SODIMM laptop RAM
16 GB DDR5-4800 SODIMM for laptops, all-in-ones and NAS systems at 1.1 V with CL40 latency
- Capacity16GB
- Type262-Pin DDR5 SO-DIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.1V
- ECCNo
- 16GB DDR5 capacity enables smoother multitasking
- 4800MHz speed delivers faster data throughput
- CL40 latency supports responsive system operation
- 1V voltage reduces power consumption
- 262-pin SODIMM fits compatible laptops and NAS systems
16 GB DDR5 4800 SODIMM
This 16 GB DDR5 module runs at 4800 MT/s with CL40 latency and 1.1 V operation. It uses the standard 262-pin SO-DIMM form factor and is unbuffered non-ECC memory. The part is built to JEDEC and RoHS specifications for broad laptop, all-in-one and NAS compatibility.
Laptop and NAS upgrades only
The module suits owners of laptops, all-in-one PCs or NAS units that accept DDR5 SO-DIMM memory. Systems requiring registered or ECC memory cannot use this unbuffered non-ECC stick. Buyers needing capacities beyond 16 GB or a different voltage should look at other modules.
Speed decides fit
The single specification that determines compatibility is the 4800 MT/s DDR5 rating (PC5-38400). Your device must support DDR5 at this data rate with 1.1 V signalling and CL40 timing for the module to function correctly.
Highlights
- 16GB DDR5 capacity enables smoother multitasking
- 4800MHz speed delivers faster data throughput
- CL40 latency supports responsive system operation
- 1V voltage reduces power consumption
- 262-pin SODIMM fits compatible laptops and NAS systems
Specifications
| Brand | OWC |
|---|---|
| Part Number | 4S8D51R816GB |
| Capacity | 16GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Questions about this item
Does my laptop need a 262-pin DDR5 SO-DIMM slot to use this 16GB module?
Yes — this module is a 262-pin DDR5 SODIMM that requires a DDR5-capable laptop, all-in-one or NAS slot.
Will this CL40 DDR5-4800 stick run at its rated speed if I keep an older DDR5-4800 module in the second slot?
Both modules share the DDR5 4800 PC5-38400 specification, so the system will operate them at the common 4800 MT/s rate with CL40 timing.
How can I verify the module is detected at 4800 MT/s with CL40 after installation?
Check the memory tab in CPU-Z or the firmware/BIOS main screen — it should report 4800 MT/s, PC5-38400 and CAS latency 40 for the installed 16GB module.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



