OWC
OWC 4GB DDR4 2400 CL17 260-pin SODIMM QNAP RAM-4GDR4A0-SO-2400 RAM-4GDR4K1-SO-2400 laptop RAM
4 GB DDR4 2400 CL17 SODIMM for laptops, NAS and all-in-one systems, backward compatible with 2133 MHz
- Capacity4GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.2V
- ECCNo
- Boosts multitasking with 4GB DDR4 2400MHz CL17 memory
- Low 1.2V voltage cuts power draw and heat
- JEDEC and RoHS compliant for warranty-safe upgrades
- 260-pin SODIMM fits laptops, AIOs and NAS units
- Backward compatible with 2133MHz and 2400MHz systems
4 GB DDR4 2400 SODIMM for QNAP NAS
This 4 GB DDR4 2400 CL17 module uses the 260-pin SO-DIMM form factor and runs at 1.2 V. It is built as a direct replacement for QNAP part numbers RAM-4GDR4A0-SO-2400 and RAM-4GDR4K1-SO-2400. The unbuffered, non-ECC design suits laptops, all-in-one PCs and compatible NAS units.
Check your system before ordering
Verify that your device accepts 260-pin DDR4 SO-DIMMs and supports 2400 MT/s or 2133 MT/s operation. The module is single-rank 1Rx8 with CL17 latency and has no heat spreader. Ensure the board does not require ECC or registered memory, as this stick provides neither.
Upgrade from 2133 MHz or lower capacity
The module is backward compatible with 2133 MHz slots, so it can replace slower DDR4 SO-DIMMs. Adding this 4 GB stick increases total memory for multitasking and larger workloads. Systems already running 2400 MHz CL17 non-ECC SODIMMs will see no speed gain, only a capacity increase.
Highlights
- Boosts multitasking with 4GB DDR4 2400MHz CL17 memory
- Low 1.2V voltage cuts power draw and heat
- JEDEC and RoHS compliant for warranty-safe upgrades
- 260-pin SODIMM fits laptops, AIOs and NAS units
- Backward compatible with 2133MHz and 2400MHz systems
Specifications
| Brand | OWC |
|---|---|
| Part Number | 2S4D41R804GB |
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Questions about this item
Does the module come with any accessories or do I need to buy a screwdriver separately?
Only the 260-pin SODIMM stick is supplied; a small Phillips screwdriver is typically needed to open the laptop or NAS chassis.
Should I choose the 4 GB stick or look for an 8 GB version for my QNAP NAS?
This part is a single 4 GB module; if your NAS has two slots and supports 8 GB total, adding a second identical stick will double capacity.
Will the CL17 2400 MHz rating actually run at 2400 MHz in my older laptop that only supports 2133 MHz?
The module is backward compatible and will automatically down-clock to 2133 MHz while keeping CL17 timings.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



