We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

OWC

OWC 4GB DDR4 2133MHz CL15 1.2V 260pin SODIMM for HP 17-x011cy/ng/no/ns/tx memory upgrade

SKU CH-XSVZ-WPPRP

4 GB DDR4 2133 MHz CL15 1.2 V 260-pin SODIMM for HP 17-x011 series laptops

  • Capacity4GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts multitasking with 4GB DDR4 2133MHz capacity
  • Runs cooler and saves power at 1.2V operation
  • Fits HP 17-x011 series laptops with 260-pin SODIMM slot
  • Meets JEDEC standards for reliable system compatibility
  • Easy DIY upgrade installs in minutes without tools

OWC 4GB DDR4 2133MHz SODIMM for HP 17-inch laptops

This 4GB DDR4 module upgrades HP 17-x011cy, 17-x011ng, 17-x011no, 17-x011ns and 17-x011tx notebooks. It runs at 2133MHz with CL15 latency at 1.2V. The 260-pin non-ECC SODIMM format fits the factory memory slot. OWC validates every stick for JEDEC compliance and warranty-safe installation.

Suits owners of the listed HP models wanting

Users needing ECC error correction or registered buffering must choose a different module. Builders working on desktop motherboards requiring 288-pin DIMMs cannot use this SODIMM. Systems already at their maximum supported memory will not benefit from adding this stick.

The decisive spec is the 260-pin DDR4 SODIMM form

Only laptops that accept DDR4 SO-DIMMs at this speed and pin count will recognise the module. HP 17-x011 series notebooks matching the listed part numbers meet this requirement. Any device needing a different pin layout, voltage or DDR generation will be incompatible.

Highlights

  • Boosts multitasking with 4GB DDR4 2133MHz capacity
  • Runs cooler and saves power at 1.2V operation
  • Fits HP 17-x011 series laptops with 260-pin SODIMM slot
  • Meets JEDEC standards for reliable system compatibility
  • Easy DIY upgrade installs in minutes without tools

Specifications

BrandOWC
Part Number2S1D41R804GB
Capacity4GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP 17-x011cy
HP 17-x011ng
HP 17-x011no
HP 17-x011ns
HP 17-x011tx

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the DDR4 2133 PC4-17000 interface run at its rated speed in my HP 17-x011ng?

The module is rated for DDR4 2133 PC4-17000 CL15 at 1.2 V. The laptop's memory controller will set the final speed; it cannot exceed this rating.

Does the 260-pin SODIMM fit the memory slot in an HP 17-x011tx?

Yes. The stick is a 260-pin DDR4 SODIMM, which is the form factor used by the listed HP 17-x011 models.

What is the correct way to seat the module, and what step do people often miss?

Align the notch with the slot key, insert at a slight angle, then press down firmly until both side clips click into the notches. The click confirms it is fully seated.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.