We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green circuit boards with black chips in a row

OWC

OWC 16GB (4x4GB) DDR2 667 PC2-5300 CL5 200-pin SODIMM Kit

SKU CH-CP1M-7NTTE

A 16 GB DDR2 667 laptop memory kit with four 4 GB SO-DIMM modules rated at CL5 and 1.8 V

  • Capacity16GB (4 x 4GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.8V
  • ECCNo

Capacity 16GB (4 x 4GB)

  • 16 GB total capacity across four 4 GB modules
  • DDR2 667 speed rated at PC2-5300 for compatible laptops
  • CL5 CAS latency at 1.8 V unbuffered operation
  • 200-pin SODIMM form factor fits select notebook and all-in-one systems
  • JEDEC and RoHS compliant for warranty-safe upgrades

Kit Composition and Purpose

This OWC kit supplies 16GB of DDR2 laptop memory arranged as four 4GB SODIMM modules. The 200-pin form factor fits compatible notebooks and all-in-one systems that accept DDR2 667 PC2-5300 CL5 unbuffered non-ECC RAM at 1.8V.

Who Benefits and Who Does Not

Upgraders with four available slots on a DDR2 platform gain the full 16GB capacity in a matched set. Systems limited to two slots or requiring a different DDR generation cannot use this kit as intended.

Deciding Specification

The modules run at DDR2 667 with a PC2-5300 rating and CL5 latency, so the motherboard must explicitly support that speed and timing combination for the kit to operate correctly.

Highlights

  • 16 GB total capacity across four 4 GB modules
  • DDR2 667 speed rated at PC2-5300 for compatible laptops
  • CL5 CAS latency at 1.8 V unbuffered operation
  • 200-pin SODIMM form factor fits select notebook and all-in-one systems
  • JEDEC and RoHS compliant for warranty-safe upgrades

Specifications

BrandOWC
Part Number5S3D22R8016S
Capacity16GB (4 x 4GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
Recommend UseLaptops, All-in-One Systems, and NAS Systems

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 200-pin SODIMM modules and what step is often missed?

Power off the laptop, remove the battery if accessible, open the memory door, align the notch on each 200-pin module with the slot key, press firmly until the side clips click, then replace the door and battery before booting.

What maintenance or replacement will the 1.8 V DDR2 kit need later?

No routine maintenance is required; the unbuffered non-ECC modules are solid-state. If a module fails, replace it with an identical 4 GB DDR2 667 CL5 200-pin stick to keep dual-channel operation.

What limit appears first under sustained use with the CL5 667 MT/s rating?

The DDR2 667 speed and CL5 latency set the bandwidth ceiling; under heavy sustained loads the memory bus saturates before the 1.8 V modules reach any thermal limit.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.