We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1.75 mm PLA+ refill coil on reusable spool

OVERTURE PLA+ 2.0 Refill 1.75mm 1kg Black

SKU CH-QW0M-3KMQC

Spoolless 1.75 mm PLA+ refill engineered for printing speeds up to 300 mm/s with enhanced toughness and compatibility with reusable spools

  • ColorBlack
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1 kilograms
  • Spoolless design cuts plastic waste and works with Bambu Lab AMS reusable spools
  • High-fluidity formula enables printing speeds up to 300mm/s without clogging or sagging
  • Enhanced toughness and impact resistance deliver stronger interlayer adhesion for durable parts
  • Optimised melt flow reduces stringing and brittle prints on standard and high-speed printers
  • 75mm diameter and 1kg weight supplied as a refill for reusable master spools

Spoolless PLA+ 2.0 Refill

OVERTURE PLA+ 2.0 Refill is a 1.75 mm diameter filament supplied as a 1 kg spoolless coil in black. It is made from an upgraded polylactic acid blend engineered for high-speed printing up to 300 mm/s. The design eliminates a disposable spool to cut plastic waste and shipping weight. It targets makers who already use a reusable spool system and want faster throughput with stronger layer adhesion.

Compatible with Bambu Lab AMS and master spools

This refill suits owners of Bambu Lab AMS or other master spools who can mount a bare coil and want the 2.0 formulation’s improved toughness and melt flow. It is not for users who need a ready-to-mount spooled product or who rely on printers that cannot accept a spoolless refill without an adapter. Buyers without a reusable spool should look at spooled filament instead.

Check reusable spool compatibility

Verify that your reusable spool or AMS accepts a 1 kg spoolless refill and that the hub dimensions match the coil. Confirm your printer’s firmware and motion system can exploit speeds up to 300 mm/s; otherwise the material will still print well at conventional rates but the headline speed benefit will not be realised. Ensure the hot-end and cooling can handle the rapid-cooling formulation.

Highlights

  • Spoolless design cuts plastic waste and works with Bambu Lab AMS reusable spools
  • High-fluidity formula enables printing speeds up to 300mm/s without clogging or sagging
  • Enhanced toughness and impact resistance deliver stronger interlayer adhesion for durable parts
  • Optimised melt flow reduces stringing and brittle prints on standard and high-speed printers
  • 75mm diameter and 1kg weight supplied as a refill for reusable master spools

Specifications

BrandOVERTURE
ColorBlack
MaterialPolylactic Acid
Diameter1.75
Weight1 kilograms

Questions about this item

Do I need a reusable spool such as the Bambu Lab AMS spool to use this spoolless refill?

Yes, the refill is designed to snap onto a reusable master spool like the Bambu Lab AMS version or other compatible spools before printing.

Will this PLA+ 2.0 filament work reliably on a standard printer that usually runs at 100mm/s?

The material is engineered for both standard and high-speed printers, so it prints smoothly at normal speeds while also supporting up to 300mm/s on capable machines.

How can I confirm the filament is performing as intended during a high-speed print?

Look for consistent extrusion, sharp detail, strong interlayer adhesion and an absence of clogging, stringing or sagging at speeds up to 300mm/s.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.