We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black PETG filament spools on paper cores, 1.75mm diameter, 4kg total

OVERTURE PETG Filament 1.75mm Black 4kg 4-Pack

SKU CH-FC5J-D9TGW

Four 1 kg spools of 1.75 mm PETG filament totalling 4 kg with ±0.02 mm dimensional accuracy for most FDM printers

  • ColorBlack 4-pack
  • MaterialPolyethylene Terephthalate Glycol
  • Diameter1.75
  • Weight4 kilograms
  • Stronger than PLA yet easier than ABS for reliable prints
  • Dimensional accuracy of +/- .02 mm ensures consistent extrusion
  • Weather-resistant material suits outdoor fixtures and automotive parts
  • 100 % cooling fan compatibility gives broad printer support
  • Four 1 kg spools on paper cores reduce plastic waste

1.75 mm PETG 4 kg bundle

This four-spool pack supplies 4 kg of black PETG filament wound on paper spools. Each 1 kg reel is neatly wound to reduce tangles during long prints. The material sits between PLA and ABS for strength, offering better impact resistance than PLA while remaining easier to print than ABS. Makers producing functional parts, outdoor fixtures or larger batches benefit from the single-colour volume.

FDM printer compatibility and setup

The 1.75 mm diameter fits most common FDM printers without hardware changes. A heated bed capable of 80 °C to 90 °C and a nozzle temperature of 230 °C to 250 °C are required for reliable adhesion. Running the part-cooling fan at 100 % helps control overhangs and stringing. The filament frees you from frequent spool changes on big jobs and suits printers that accept standard 1 kg spool dimensions.

Print temperature, cooling and dimensional control

Extrusion at 230 °C to 250 °C with the bed at 80 °C to 90 °C yields consistent layer bonding. Keeping the fan at 100 % manages heat buildup in the hot end and improves bridge quality. Dimensional accuracy is held to ± 0.02 mm, supporting tight fits in mechanical assemblies. The PETG formulation resists moisture and UV exposure, so printed parts retain strength in outdoor use.

Highlights

  • Stronger than PLA yet easier than ABS for reliable prints
  • Dimensional accuracy of +/- .02 mm ensures consistent extrusion
  • Weather-resistant material suits outdoor fixtures and automotive parts
  • 100 % cooling fan compatibility gives broad printer support
  • Four 1 kg spools on paper cores reduce plastic waste

Specifications

BrandOVERTURE
ColorBlack 4-pack
MaterialPolyethylene Terephthalate Glycol
Diameter1.75
Weight4 kilograms

Questions about this item

At what dimensional accuracy does this filament stay consistent during long prints?

The filament holds a tolerance of ±0.02 mm across all four spools, keeping extrusion steady over extended runs.

What bed and nozzle temperatures should I hold for all-day printing without warping?

Run the nozzle at 230 – 250 °C and the heated bed at 80 – 90 °C with the part-cooling fan at 100 % for stable layer adhesion.

Which spool core and diameter must my printer already accept for these four rolls to mount and feed?

Each 1 kg roll uses a standard 1.75 mm diameter on a paper spool, the common format for most FDM printers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.