We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PLA+ 2.0 filament on a 1kg paper spool, 1.75mm diameter

OVERTURE OT1001015 PLA+ 2.0 Filament 1.75mm 1kg Black

SKU CH-PBTF-GFJ6G

High-speed PLA+ filament prints up to 300 mm/s with enhanced toughness and minimal warping on a 1 kg vacuum-sealed spool

  • ColorBlack
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1 kilograms
  • Print up to 300mm/s with high-fluidity rapid-cooling formulation
  • Enhanced toughness and impact resistance for durable parts
  • Wide temperature window and minimal warping for reliable prints
  • Mechanically wound 1kg spool vacuum-sealed with desiccant
  • Paper spool adopted in 2021 for sustainability

High-Speed PLA+ 2.0 Filament

This 1.75 mm PLA+ 2.0 spool weighs 1 kilogram and is engineered for FDM printers that can reach 300 mm/s. The rapid-cooling formulation keeps extrusion consistent at speeds where standard PLA tends to clog or sag. It suits makers who want shorter print times without sacrificing layer adhesion or surface detail.

Mechanical Winding and Paper Spool

The filament arrives vacuum-sealed with desiccant on a mechanically wound paper spool introduced in 2021. That packaging reduces moisture uptake and eliminates the plastic spool waste common in earlier bundles. You can load it directly without pre-drying and recycle the cardboard core when empty.

Printer Compatibility Check

Verify that your hot-end can maintain the temperatures required for the wider printing window and that your extruder gearing handles the higher flow rates at 300 mm/s. Bowden setups with long tubes may need retraction tuning to avoid stringing. Ensure the spool holder accepts a 1 kg paper core without an adapter.

Highlights

  • Print up to 300mm/s with high-fluidity rapid-cooling formulation
  • Enhanced toughness and impact resistance for durable parts
  • Wide temperature window and minimal warping for reliable prints
  • Mechanically wound 1kg spool vacuum-sealed with desiccant
  • Paper spool adopted in 2021 for sustainability

Specifications

BrandOVERTURE
ModelOT1001015
ColorBlack
MaterialPolylactic Acid
Diameter1.75
Weight1 kilograms

Questions about this item

Does the 1.75 mm PLA+ 2.0 spool need any special storage or drying before use?

The spool is vacuum-sealed with desiccant and mechanically wound, so it is ready to print straight from the package.

What print speed can the PLA+ 2.0 handle before extrusion becomes inconsistent?

The formulation is designed for consistent extrusion and sharp detail up to 300 mm/s on compatible high-speed printers.

How much heat does the filament generate during a full-day print run?

The material prints at standard PLA temperatures with a wide window, minimal warping and no extra cooling requirements beyond normal printer airflow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.