We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact SFP+ copper transceiver with RJ-45 connector, matte metal housing

Other Electricities

Other Electricities Ruckus 10G-SFPP-TX-A Compatible 10GBASE-T SFP+ Copper Transceiver 30m 2.9W

SKU CH-0JF4-448GB

10Gbps SFP+ copper transceiver with RJ-45 connector reaching 30 metres on Cat6a or Cat7 cable

  • Typesfp+
  • 10 Gbps throughput over standard RJ-45 copper cabling
  • Reaches 30 m on Cat6a or Cat7 infrastructure
  • Low 2.9 W draw keeps rack power budgets lean
  • Operates reliably from 0 to 70 °C commercial range
  • Built to IEEE 802.3an, 802.3az and SFP+ MSA standards

SFP+ 10GBASE-T copper transceiver

This SFP+ module delivers 10 Gbps Ethernet over RJ-45 copper cabling. It is designed for network switches and servers that accept standard SFP+ ports. The transceiver operates across a commercial temperature range of 0 to 70 °C (32 to 158 °F). It suits data-centre links where fibre is not required.

Fits SFP+ cages with RJ-45 patch cables

The module plugs directly into any SFP+ cage that supports 10GBASE-T copper transceivers. It uses Cat6a or Cat7 cabling for runs up to 30 m, freeing the installer from fibre patch cords and optics. Power draw is 2.9 W per port, so the host chassis must supply adequate power and airflow for the number of modules installed. Compliance with SFP+ MSA and SFF-8431 ensures mechanical and electrical interoperability.

Sustained 10 Gbps over copper at 2.9 W

Under continuous load the transceiver maintains line-rate 10 Gbps while consuming 2.9 W. The rated MTBF of 5,000,000 hours reflects long-term reliability in always-on environments. It is not suited for links longer than 30 m or for cabling below Cat6a specification. Buyers needing extended reach or fibre media should select a different transceiver type.

Highlights

  • 10 Gbps throughput over standard RJ-45 copper cabling
  • Reaches 30 m on Cat6a or Cat7 infrastructure
  • Low 2.9 W draw keeps rack power budgets lean
  • Operates reliably from 0 to 70 °C commercial range
  • Built to IEEE 802.3an, 802.3az and SFP+ MSA standards

Specifications

Typesfp+

Questions about this item

What is the maximum cable distance this transceiver supports at 10 Gbps?

It reaches 30 m over Cat6a or Cat7 copper cabling at the full 10 Gbps data rate.

How much heat should I expect from the module during continuous operation?

Power draw is 2.9 W, and the commercial temperature range is rated 0 to 70 °C (32 to 158 °F).

Which switch port standard must my equipment provide for this SFP+ module?

The transceiver follows the SFP+ MSA and SFF-8431 specifications for mechanical and electrical compatibility.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.