OSRAM
OSRAM P-VIP 200/1.0 E54 200W 9000 lm dlp replacement lamp
Genuine Osram bare bulb rated 9000 lm at 200 W with a 1.0 mm arc gap for the Epson EH-TW2800 projector
- TypeProjector Lamps
- Genuine Osram bare bulb matches original cooling and ignition specs
- 9000 lm brightness at 200 W for vivid projection
- 2500 h rated life at 200 W reduces replacement frequency
- E54 reflector with 1.0 arc gap ensures precise fit
- Compatible with Epson EH-TW2800 projector
Replacement Bare Bulb for Epson EH-TW2800
This genuine OEM Osram projector bulb is a bare replacement component designed specifically for the Epson EH-TW2800 projector. It is manufactured to match the required cooling setup and correct driving mode of the original equipment. The bulb uses the proper ignition parameters to ensure compatibility and performance. It suits owners needing a direct component swap without a housing assembly.
Thermals and Power Draw
The lamp operates at a rated 200 W power consumption and delivers a light output of 9000 lm. It is engineered to match the projector's required cooling setup, which helps avoid overheating that could lead to shattering or premature lumen decay. Correct driving mode implementation prevents flickering and colour inaccuracies during operation. The arc gap measures 1.0 mm to support stable ignition.
Rated Life and Warranty Coverage
The projector bare bulb carries a rated life of 2500 hours at 200 W. It is identified by the P-VIP 200/1.0 E54 designation with an E54 reflector shape. All bare bulbs are covered under a 180-day warranty against defective products. This component is not for buyers who require a complete lamp module with housing included.
Highlights
- Genuine Osram bare bulb matches original cooling and ignition specs
- 9000 lm brightness at 200 W for vivid projection
- 2500 h rated life at 200 W reduces replacement frequency
- E54 reflector with 1.0 arc gap ensures precise fit
- Compatible with Epson EH-TW2800 projector
Specifications
| Brand | BulbAmerica |
|---|---|
| Type | Projector Lamps |
Questions about this item
How do I install the bare bulb into the Epson EH-TW2800 housing and which step causes the most failures?
Remove the old P-VIP 200/1.0 E54 bulb from its cage, insert the new Osram unit without touching the Arc tube, then reseat the housing; the step most often missed is skipping the cool-down period before first ignition, which can shatter the lamp.
What maintenance or replacement will this 200 W bare bulb need after extended use?
The lamp is rated for 2500 hours at 200 W; once brightness drops or the projector warns of end-of-life, replace the bare bulb again — no filter or housing service is required for this component.
What limit appears first when the projector runs continuously at full power?
Thermal stress on the 1.0 mm Arc gap and E54 reflector becomes the limiting factor; sustained 9000 lm output accelerates lumen decay and can trigger protective shutdown before the 2500-hour rating is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



