We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
OSRAM MSR Gold 1000 MiniFastFit lamp with PGJX36 base

OSRAM

OSRAM LOK-IT 1000/PS dlp replacement lamp for Lightsky E1000 SPOT

SKU CH-E604-AB0T4

1000 W DLP replacement lamp for the Lightsky E1000 SPOT projector, rated at 82000 lumens and 900 hours life

  • TypeProject Lamp
  • Weight0.0990
  • Natural skin tones and vivid colours for theatre use
  • 1000 W rated power with 11.4 A lamp current for bright output
  • 82000 lm nominal luminous flux delivers strong illumination
  • 900 h life to 50 % failures supports extended runs
  • Universal PGJX36 base fits Lightsky E1000 SPOT directly

OSRAM 1000 W DLP replacement lamp

The OSRAM LOK-IT 1000/PS is a 1000 W MSR Gold MiniFastFit lamp built for the Lightsky E1000 SPOT moving head. It uses a PGJX36 base and operates in any position. Rated output is 82 000 lumens at 6000 K with a CRI of 80. Nominal life to 50 % failures is 900 hours.

Suits touring and stage professionals

Designed for entertainment venues that need consistent colour and high output from a single source. Buyers who need a different base type, lower power draw or a longer service interval should look at other options. The lamp is dimmable, but fixtures without compatible ballast control cannot use that feature.

Verify fixture compatibility before ordering

Confirm the moving head accepts a PGJX36 cap and supplies at least 198 V ignition voltage. Ensure the cooling system can handle a maximum bulb temperature of 950 °C and pinch temperature of 500 °C. Check that the ballast can deliver 11.4 A lamp current at 1000 W.

Highlights

  • Natural skin tones and vivid colours for theatre use
  • 1000 W rated power with 11.4 A lamp current for bright output
  • 82000 lm nominal luminous flux delivers strong illumination
  • 900 h life to 50 % failures supports extended runs
  • Universal PGJX36 base fits Lightsky E1000 SPOT directly

Specifications

BrandJaspertronics
ModelLightsky E1000 SPOT-LAMP
Part NumberLightsky E1000 SPOT-LAMP
TypeProject Lamp
Weight0.0990

Questions about this item

What fixture does the PGJX36 base of this lamp fit?

The PGJX36 cap-base is designed for the Lightsky E1000 SPOT luminaire and any other fixture that accepts a PGJX36 lamp.

Can I run this 1000 W lamp on a ballast rated for lower-wattage MSR lamps?

No. The lamp draws 11.4 A at 1000 W and requires a ballast that supplies at least 198 V ignition voltage for proper operation.

How do I verify the lamp is performing correctly after installation?

Check for a stable 6000 K white output with chromaticity coordinates near 0.321 x and 0.330 y, and confirm the fixture reports normal lamp current around 11.4 A.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.