OSRAM
OSRAM AE-610 BEAM 100W 3680lm 6000h standard bulb
A 100W high-intensity discharge replacement lamp delivering 3680 lumens with a 6000-hour rated life
- TypeHigh Intensity Discharge
- Lumen Range3680
- Wattage100
- Life Time Hours6000
- High-intensity discharge delivers 3680 lumens for bright projection
- 100-watt power draw balances output with energy use
- 6000-hour rated life reduces replacement frequency
- Osram original OEM lamp ensures reliable compatibility
- AE-610 BEAM model fits compatible projector housings
OSRAM AE-610 BEAM 100W Projector Lamp
The OSRAM AE-610 BEAM is a high-intensity discharge replacement lamp rated at 100 watts. It delivers 3680 lumens for compatible projectors. The unit is supplied new as an original OEM component. It suits owners needing a direct factory-spec replacement.
Thermal Performance and Power Draw
The lamp operates at its rated 100 watt power level during normal projection use. Its high-intensity discharge design manages heat through the projector's own cooling system. Rated life reaches 6000 hours before brightness drops to half. Acoustic output depends on the host projector fan profile.
Installation Fit and System Impact
The AE-610 BEAM fits projectors designed for this specific lamp module without adapter changes. It restores factory brightness and colour balance when the old lamp expires. No extra cabling or firmware steps are required. Buyers whose projector uses a different lamp code cannot use this unit.
Highlights
- High-intensity discharge delivers 3680 lumens for bright projection
- 100-watt power draw balances output with energy use
- 6000-hour rated life reduces replacement frequency
- Osram original OEM lamp ensures reliable compatibility
- AE-610 BEAM model fits compatible projector housings
Specifications
| Brand | OSRAM |
|---|---|
| Type | High Intensity Discharge |
| Lumen Range | 3680 |
| Wattage | 100 |
| Life Time Hours | 6000 |
Questions about this item
How do I install the AE-610 BEAM bulb and what step is often missed?
Switch off the power, allow the fixture to cool, then insert the 100 W lamp into the correct socket; the step often missed is confirming the ballast matches the 100 watt rating before turning the power back on.
What maintenance or replacement will the AE-610 BEAM need later?
The lamp is rated for 6000 hours of life; once that time is reached the entire unit must be replaced because the light source is not serviceable.
What limit appears first during sustained use of the AE-610 BEAM?
After 6000 hours the 3680 lumen output will have degraded to the rated end-of-life level, so the lamp must be changed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



