OSRAM
OSRAM 69812 220 W dlp replacement lamp
Bare 220 W DLP projector lamp delivers 9,900 lm brightness with a 4,000-hour rated life
- TypeProjector Lamps
- Original Osram bare bulb ensures precise fit and performance
- 9,900 lm brightness at 220 W for vivid projection
- 4,000-hour rated life at 220 W reduces replacement frequency
- Matches original cooling setup and driving mode for reliable operation
- 180-day warranty covers defects for peace of mind
OSRAM 69812 220 W DLP Replacement Lamp
The OSRAM 69812 is a bare DLP projector bulb rated at 220 W and 9,900 lm. It is manufactured to original specifications so that it matches the required cooling setup and driving mode of compatible projectors. The lamp carries a rated life of 4,000 h at full power and is supplied new without a housing.
Who this suits and who should look elsewhere
This lamp suits owners of compatible DLP projectors who are comfortable installing a bare bulb into their existing housing. It is not for buyers who need a complete lamp module with housing included, nor for those whose projector requires a different wattage or light-output specification.
Capacity and headroom
At 220 W the bulb delivers 9,900 lm for up to 4,000 hours before reaching its rated end of life. It comfortably handles standard presentation and home-theater duty cycles at full brightness. Extended daily use beyond the rated hours will reduce output and eventually require replacement.
Highlights
- Original Osram bare bulb ensures precise fit and performance
- 9,900 lm brightness at 220 W for vivid projection
- 4,000-hour rated life at 220 W reduces replacement frequency
- Matches original cooling setup and driving mode for reliable operation
- 180-day warranty covers defects for peace of mind
Specifications
| Brand | OSRAM |
|---|---|
| Type | Projector Lamps |
Questions about this item
What projector housing do I need to install this Osram 69812 bare bulb into?
This is a bare bulb without housing, so you must reuse the original lamp cage from your projector or purchase a compatible housing separately before installation.
Will the 220 W power draw and 9,900 lm output match my existing projector's lamp driver and cooling system?
The bulb is manufactured to match the required cooling setup and correct driving mode for the original equipped lamp, aligning with the projector's existing 220 W power and thermal design.
How can I verify the lamp is performing correctly after I fit it?
Confirm the projector powers on without errors, achieves the expected 9,900 lm brightness, and tracks lamp hours toward the 4,000 h rated life at 220 W.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
