We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small square monocrystalline solar cells with clear epoxy coating and barrel plugs

OSEPP

OSEPP SC10036 Monocrystalline Solar Cell 100mA 3.6V 2 Pack

SKU CH-48BE-M0K39

Two monocrystalline solar cells deliver 100 mA at 3.6 V with Arduino-compatible barrel plugs and epoxy encapsulation for outdoor durability

  • Monocrystalline cells deliver 100 mA at 3.6 V for Arduino projects
  • Low-reflect epoxy encapsulation shields cells from impact and outdoor exposure
  • Barrel-plug termination connects directly to Arduino-compatible boards
  • Compact 60 mm square footprint fits tight enclosures
  • Two-cell pack doubles available current for larger loads

Ready-to-wire solar pair for Arduino projects

Two monocrystalline cells arrive with barrel plugs already fitted, so they connect directly to compatible development boards. Each unit delivers 100 mA at 3.6 V and is sealed in clear epoxy for outdoor durability. The 60 mm square format suits breadboard-scale experiments and portable prototypes.

Replaces bare cells that need soldering

The pre-attached connectors remove the need for a soldering iron, heat-shrink tubing or custom cabling when moving from loose photovoltaic wafers. The jump is worth it when you want repeatable voltage without wiring errors or when the project must survive rain and handling.

Verify barrel-plug polarity and voltage tolerance

Confirm that your board accepts 3.6 V on the barrel jack and that the centre-positive convention matches the cell output. Check available mounting space for the 60 mm footprint and ensure the 100 mA current meets the load requirements of your circuit.

Highlights

  • Monocrystalline cells deliver 100 mA at 3.6 V for Arduino projects
  • Low-reflect epoxy encapsulation shields cells from impact and outdoor exposure
  • Barrel-plug termination connects directly to Arduino-compatible boards
  • Compact 60 mm square footprint fits tight enclosures
  • Two-cell pack doubles available current for larger loads

Specifications

BrandOSEPP
ModelSC10036

Questions about this item

What are the dimensions of each solar cell so I can plan the mounting layout?

Each cell measures 60 x 60 mm, so allow that footprint plus any spacing you need for wiring or frame edges.

How do I connect the cells to an Arduino without soldering to the bare pads?

The pack includes a barrel plug termination; plug it directly into the Arduino power jack — the common mistake is forgetting to set the board to accept external power.

Will the epoxy encapsulation yellow or degrade, and can I replace just one cell if it fails?

The low-reflecting water-clear epoxy is designed to resist yellowing and outdoor exposure; cells are sold as a matched 2-pack, so plan to swap both together for balanced output.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.