We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 10-pin SATA cable with black 2.5 inch drive caddy

ORVIX

ORVIX SATA cable 10-pin 7.0 cm HP Envy 15-J 17-J M7-J000 M6-N 15-Q

SKU CH-ZTEV-F007A

A 10-pin SATA cable and 2.5-inch caddy for compatible HP Envy 15 and 17 models

  • Fits HP Envy 15-J, 17-J and M7-J000 series
  • 10-pin SATA connector matches original DW15 6017B0416801 part
  • 0 cm cable keeps 2.5-inch drive installation tidy
  • Supports 2.5-inch SATA SSD or HDD up to 7.0 mm
  • Includes matching caddy carrier for secure drive mounting

ORVIX 10-pin SATA cable and caddy

This ORVIX kit includes a 10-pin SATA cable and a 2.5-inch hard-drive caddy carrier. The cable measures approximately 7.0 cm overall, excluding the SATA header. It is designed for HP Envy 15-J, 17-J, M7-J000, M6-N and 15-Q series laptops. The part number is DW15 6017B0416801.

Fits specific HP Envy models only

The assembly suits owners of the listed HP Envy 15-J, 17-J, M7-J000, M6-N and 15-Q models who need to replace a damaged cable or install a 2.5-inch SATA drive up to 7.0 mm tall. Builders working on any other laptop brand or HP series should look elsewhere because the connector and pin-out are model-specific.

10-pin SATA connector decides fit

The single specification that determines compatibility is the 10-pin SATA connector. Only systems that accept this exact pin arrangement will work with the cable. The 7.0 cm length and 2.5-inch caddy dimensions follow from that connector choice.

Highlights

  • Fits HP Envy 15-J, 17-J and M7-J000 series
  • 10-pin SATA connector matches original DW15 6017B0416801 part
  • 0 cm cable keeps 2.5-inch drive installation tidy
  • Supports 2.5-inch SATA SSD or HDD up to 7.0 mm
  • Includes matching caddy carrier for secure drive mounting

Specifications

BrandORVIX

Questions about this item

How do I install the 10-pin SATA cable into the HP Envy caddy carrier?

Align the 10-pin connector with the caddy's socket, press firmly until it clicks, then secure the 2.5-inch drive with the supplied screws. The 7.0 cm cable leaves little slack, so route it before tightening the caddy in the chassis.

What maintenance or replacement will the 10-pin SATA cable need over time?

The cable itself has no moving parts, but repeated drive swaps can stress the 10-pin header. Inspect the connector for bent pins whenever you remove the 2.5-inch drive and replace the cable if any pin is deformed.

What is the first limit that appears when the 10-pin SATA cable runs continuously in an HP Envy 15-J?

The 7.0 cm length is the primary constraint; it forces the drive to sit close to the motherboard header, so airflow around the 2.5-inch SSD or hard drive becomes the limiting factor during sustained transfers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.