ORVIX
ORVIX M.2 2280 SSD Heatsink for Dell G15 5510 5511 5515 Alienware M15 R5 R6
M.2 2280 SSD heatsink with thermal pad for Dell G15 and Alienware M15 laptops
- Fits Dell G15 5510 5511 5515 and Alienware M15 R5 R6
- Supports M.2 2280 solid-state drives only
- Adds a second SSD using Slot 1 or Slot 2
- Includes heatsink thermal plate with screw for cooling
- Matches Dell part numbers 26X1Y 026X1Y 29GT8 029GT8
Compatible Dell and Alienware models
This heatsink cover fits Dell G15 5510, 5511 and 5515 laptops as well as Alienware M15 R5 and M15 R6 systems. It is designed for the M.2 2280 form factor and matches Dell part numbers 26X1Y, 026X1Y, CN-026X1Y, 29GT8, 029GT8 and CN-029GT8. The package includes one thermal plate with a mounting screw.
Slot 1 and Slot 2 expansion
The adapter works in either the primary or secondary M.2 slot, letting owners add a second 2280 solid-state drive to supported G15 models. Buyers whose laptop lacks a free M.2 2280 slot or who need a different drive length should look elsewhere.
Thermal plate for single 2280 drive
One heatsink plate covers a single M.2 2280 SSD, providing passive cooling for the installed drive. It does not accommodate multiple drives, other form factors or active cooling requirements.
Highlights
- Fits Dell G15 5510 5511 5515 and Alienware M15 R5 R6
- Supports M.2 2280 solid-state drives only
- Adds a second SSD using Slot 1 or Slot 2
- Includes heatsink thermal plate with screw for cooling
- Matches Dell part numbers 26X1Y 026X1Y 29GT8 029GT8
Specifications
| Brand | ORVIX |
|---|
Questions about this item
Does the heatsink cover both Slot 1 and Slot 2 on my Dell G15 5510?
The bracket is designed to fit either Slot 1 or Slot 2 on the G15 5510, 5511 and 5515, so it works in whichever slot you populate.
Will the thermal pad contact the controller on an older 2280 drive I already own?
The pad spans the full length of a 2280 module, covering both the controller and the NAND packages on any standard 2280 SSD.
How can I confirm the heatsink is seated correctly after installation?
The single captive screw should sit flush with the standoff and the metal plate should lie flat against the drive with no visible gap.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



