We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic 2.5 to 3.5 SATA drive adapter bracket with open sides

Orico

Orico 1125SS-V1-BK-EP 2.5 to 3.5 SATA hard drive adapter

SKU CH-M9F6-A3VX2 MPN 1125SS-V1-BK-EP

Converts 2.5-inch SATA drives to 3.5-inch form factor with direct SATA III interface supporting 6Gbps speeds

Model 2.5 SSD SATA to 3.5 HDD Adapter

  • 5.25 Trayless
  • 2.5 SSD SATA to 3.5 HDD Adapter
  • 2.5 to 3.5 Drive Adapter Combo
  • 2.5-inch HDD/SSD to 3.5-inch(D2S-6G)

Struck-through versions exist but are not stocked here.

Option 1 Pack

  • 1 Pack
  • 2 Packs
  • 5 Packs

Struck-through versions exist but are not stocked here.

  • Converts 2.5-inch drives to 3.5-inch form factor for desktop bays
  • Cable-free SATA III interface enables hot-swap installation without drivers
  • Up to 6 Gbps transfer speed with backward compatibility to SATA I/II
  • Precisely aligned screw holes secure drives from 7 mm to 12.5 mm thick
  • Fits standard 3.5-inch drive bays and enclosure trays

2.5-to-3.5 SATA drive adapter

The Orico 1125SS-V1-BK-EP converts a 2.5-inch SATA SSD or HDD into a 3.5-inch form factor so it fits standard desktop drive bays. It accepts drives measuring 7 mm, 9.5 mm or 12.5 mm thick and secures them with dedicated screw holes. The bracket itself mounts directly into a 3.5-inch bay using the same screw pattern.

SATA III interface with hot-swap support

A built-in SATA 3.0 connector delivers up to 6 Gbps throughput and is backward compatible with SATA I and II. No separate data cables or drivers are required, and the adapter supports hot swapping for quick drive changes. This replaces the need for a separate mounting tray plus a SATA cable when installing a 2.5-inch drive in a desktop chassis.

Suits desktop builders adding laptop drives

Ideal for anyone fitting a 2.5-inch SATA drive into a 3.5-inch bay in a tower, rack or external enclosure. Not suited for systems that only provide M.2 or PCIe slots, or for users who need to adapt a 3.5-inch drive to a smaller bay.

Highlights

  • Converts 2.5-inch drives to 3.5-inch form factor for desktop bays
  • Cable-free SATA III interface enables hot-swap installation without drivers
  • Up to 6 Gbps transfer speed with backward compatibility to SATA I/II
  • Precisely aligned screw holes secure drives from 7 mm to 12.5 mm thick
  • Fits standard 3.5-inch drive bays and enclosure trays

Specifications

No published specifications for this item yet.

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What drive thicknesses does the 1125SS-V1-BK-EP bracket accept?

The bracket fits 2.5-inch SATA drives measuring 7 mm, 9.5 mm or 12.5 mm thick.

Which way round do the screws go when mounting the adapter in a 3.5-inch bay?

Fasten the drive to the bracket first, then secure the whole assembly into the bay using the outer screw holes.

Will the onboard SATA 3.0 connector need replacement over time?

The SATA 3.0 interface is rated for 6 Gbps and is backward compatible with SATA I/II; no scheduled replacement is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.