We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small black boxes with USB and Ethernet ports, linked by a network cable

Orei LLC

Orei LLC USB 2.0 Cat5e/6 Extender 165 ft 2 Port 2 in 1 accessory

SKU CH-EJKE-0BHE1

Extends USB 2.0 signals up to 130 feet over Cat5e/6 cable with two ports and power over cable, requiring no software

  • Extends USB 2.0 up to 130 ft over Cat5e/6 cable
  • Single power adapter at receiver simplifies long-distance setups
  • Plug-and-play with no software needed for Windows, macOS, Android, Linux
  • Two USB ports let you connect multiple peripherals simultaneously
  • Includes transmitter, receiver, power adapter and mounting ears

USB 2.0 Cat5e/6 Extender 165 ft

This extender carries a USB 2.0 signal up to 165 feet over standard Cat5e or Cat6 cable. It provides two USB ports at the receiver end for keyboards, mice, webcams or other peripherals. The unit supports Windows, MacOS, Android and Linux without any driver installation. A single power adapter at the receiver powers both transmitter and receiver through the cable.

Replaces direct USB cables beyond 130 ft

Standard USB cables are limited to roughly 5 metres before signal loss occurs. This extender pushes the reliable range to 130 feet (40 metres) while keeping 480 Mbps throughput. The jump is worth it when a printer, touch screen or conference camera must sit far from the host computer. It does not suit buyers who need more than two downstream ports or bandwidth above USB 2.0 speeds.

Plug-and-play setup with PoC

Connect the transmitter to the host, the receiver to the peripherals, link both with a Cat5e/6 patch cord, then plug the supplied adapter into the receiver. Power over cable means no outlet is needed at the transmitter side. The only common issue is exceeding the 130-foot cable limit, which causes drop-outs. Only one input source can be active at the transmitter at a time.

Highlights

  • Extends USB 2.0 up to 130 ft over Cat5e/6 cable
  • Single power adapter at receiver simplifies long-distance setups
  • Plug-and-play with no software needed for Windows, macOS, Android, Linux
  • Two USB ports let you connect multiple peripherals simultaneously
  • Includes transmitter, receiver, power adapter and mounting ears

Specifications

No published specifications for this item yet.

Questions about this item

What cable length and type does the extender need for a 40 metre run?

Use Cat5e or Cat6 cable up to 40 metres (130 feet) for the link between the transmitter and receiver units.

Which end requires the power adapter during installation?

Connect the single power adapter to the receiver (RX) end; the transmitter draws power over the Cat5e/6 cable via Power Over Cable.

How often should the mounting ears be checked after fitting?

Inspect the mounting ears and cable connections every 12 months to ensure the extender remains securely fixed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.