We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with HDMI and Ethernet ports, IR sensor window, and status LEDs

Orei LLC

Orei HDMI Extender Receiver HD-EXM330-RX 330 ft 1080p 2 in 1 accessory

SKU CH-6PE6-4NQ28

Extends 1080p HDMI up to 330 ft over Cat5e/Cat6 with IR control and loop-out monitoring

  • Extends HDMI up to 330 ft over Cat5e/Cat6 at 1080p
  • IR remote control works at 38 kHz from the display side
  • Loop-out on transmitter adds a local monitoring display
  • M-JPEG compression keeps 1080p quality with minimal loss
  • Supports 480i, 720p, 1080p at 50/60 Hz with zero driver install

HDMI Receiver for 330-Foot Extension

This receiver extends HDMI signals up to 330 feet over Cat5e or Cat6 cable at 1080p resolution. It is the receiver unit designed to work with the HD-EXC330-K transmitter kit. The device supports point-to-point and one-to-many distribution setups for flexible installation. IR control extension at 38 kHz allows remote source operation from the display location.

Limits of Cat5e/Cat6 Transmission

The extender uses M-Jpeg compression with minimal quality loss to reach the 100-meter distance limit. Supported video formats include 480i, 480p, 576i, 576p, 720p, 1080i and 1080p at 50 or 60 Hz, plus 2K at 60 Hz. Compliance with HDMI 1.3 and HDCP 1.4 defines the maximum signal standard this link can carry. No driver installation is required for operation.

Receiver-Only Unit Requires Matching Transmitter

This product is a receiver only and cannot function without the compatible HD-EXC330-K transmitter. Buyers who need a complete point-to-point kit must source the transmitter separately. The transmitter provides the HDMI loop-out for local monitoring, a feature not present on this receiver. Ensure the matching transmitter is available before purchasing this unit.

Highlights

  • Extends HDMI up to 330 ft over Cat5e/Cat6 at 1080p
  • IR remote control works at 38 kHz from the display side
  • Loop-out on transmitter adds a local monitoring display
  • M-JPEG compression keeps 1080p quality with minimal loss
  • Supports 480i, 720p, 1080p at 50/60 Hz with zero driver install

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose the receiver only or the full kit for a 330 ft run?

This listing is the receiver only (HD-EXM330-RX); it requires the matching HD-EXC330-K transmitter to work. The pair together extends 1080p up to 330 ft over Cat5e/Cat6.

Will 1080p at 60 Hz look the same at the far end as a direct cable?

The extender supports 1080p 50/60 Hz with M-Jpeg compression and claims zero loss for listed resolutions including 1080p 60 Hz, so image quality should match a direct connection.

What does the HDMI 1.3 and HDCP 1.4 rating cap in practice?

HDMI 1.3 limits the link to 1080p 60 Hz and 2‑channel stereo; HDCP 1.4 allows protected 1080p content but blocks newer 4K or HDR streams.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.