OPTOMA
OPTOMA X319USTir Projector Lamp 190W 4500 hrs
A 190 W UHP replacement lamp module rated for 4,500 hours, supplied fully assembled for immediate installation
- TypeUHP
- Wattage190W
- Lamp Life4,500 hrs
- Genuine Philips UHP 190W bulb for reliable brightness
- 4,500-hour lamp life reduces replacement frequency
- Pre-assembled housing enables quick tool-free installation
- Manufactured to ISO 9001 quality standards for consistent performance
- Compatible with Optoma X319USTir projector model
Genuine 190W UHP replacement lamp
The Optoma X319USTir lamp module ships as a fully assembled Philips UHP 190W bulb inside its housing, ready for direct installation. It restores factory brightness and colour balance for the X319USTir projector without additional alignment steps.
Rated 4,500 hours at full power
At the native 190W setting the lamp is specified for 4,500 hours of operation. Running the projector in any eco or low-power mode will extend that interval, while continuous maximum-output use will reach the rated limit sooner.
Fits only the Optoma X319USTir
The module matches the SP.71K01GC01 part number and is mechanically keyed for that single model. Buyers with any other Optoma projector or a different brand must source the correct lamp assembly for their unit.
Highlights
- Genuine Philips UHP 190W bulb for reliable brightness
- 4,500-hour lamp life reduces replacement frequency
- Pre-assembled housing enables quick tool-free installation
- Manufactured to ISO 9001 quality standards for consistent performance
- Compatible with Optoma X319USTir projector model
Specifications
| Brand | OPTOMA |
|---|---|
| Type | UHP |
| Wattage | 190W |
| Lamp Life | 4,500 hrs |
Questions about this item
Which version of the Optoma X319USTir lamp should I choose among the OEM and compatible options?
Three OEM versions exist — the original bulb-maker lamp, the Optoma-sold OEM lamp, and an alternative OEM bulb-maker lamp — plus a compatible version built with genuine OEM parts; all meet ISO 9001 checks for beam performance, ignition, voltage, appearance, connections and run-time.
What does the 190 W rating mean once the lamp is installed in my projector?
The lamp draws 190 W during operation, matching the power specification the Optoma X319USTir projector was designed for.
What interface does the lamp use and what does it cap in practice?
The lamp plugs directly into the projector’s dedicated lamp connector; the housing and bulb are pre-assembled so installation is limited to seating the module and resetting the projector’s lamp-hour counter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



