We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Optoma X20E projector lamp module with 200W UHP bulb in housing

OPTOMA

OPTOMA X20E EP716/719 200W projector lamp

SKU CH-G3X8-NVJ57

Genuine compatible 200W replacement lamp module with pre-assembled housing for Optoma projectors, rated for 2,000 hours of use

  • TypeProjector Lamp
  • Wattage200W
  • Lamp Life2,000 Hrs.
  • Genuine compatible replacement fits Optoma X20E projectors
  • New 200W UHP bulb delivers bright projection
  • 2,000-hour lamp life supports extended use
  • Fully assembled housing enables quick installation
  • Manufactured to ISO9001 standards for reliable performance

Genuine replacement lamp for Optoma X20E

This 200W UHP lamp module fits the Optoma X20E projector using part numbers EP716 or EP719. It arrives as a complete housing and bulb assembly so the projector can be restored to working order without extra parts. The unit is manufactured to ISO9001 quality standards and supplied new. Buyers needing a different projector model or a higher-wattage module cannot use this lamp.

Rated output and service life

The lamp draws 200W and is rated for 2,000 hours of operation under normal use. Brightness will gradually decline as the lamp ages, and the projector will typically warn when replacement is due. No other power ratings, colour specifications or lumen figures are provided. Installations that demand longer continuous run-times or higher light output will exceed the design limits of this module.

Simple housing swap with standard precautions

Installation consists of removing the old lamp housing and inserting the new module until it seats firmly; no tools are usually required beyond a screwdriver for the access panel. Allow the projector to cool completely before starting, and avoid touching the bulb glass with bare fingers to prevent hot-spots. The most common issue is forgetting to reset the lamp-hour counter in the projector menu after fitting the new unit.

Highlights

  • Genuine compatible replacement fits Optoma X20E projectors
  • New 200W UHP bulb delivers bright projection
  • 2,000-hour lamp life supports extended use
  • Fully assembled housing enables quick installation
  • Manufactured to ISO9001 standards for reliable performance

Specifications

TypeProjector Lamp
Wattage200W
Lamp Life2,000 Hrs.

Questions about this item

Should I pick the OEM, Optoma-sold OEM, alternative OEM or third-party compatible version of the EP716/719 lamp?

The OEM version comes from the original bulb maker such as Philips or Osram. The Optoma-sold OEM is the same lamp under the Optoma brand. An alternative OEM uses a different major manufacturer. The third-party compatible uses genuine OEM parts at a lower cost. All meet ISO 9001 quality checks.

What does the 200 W rating mean for brightness and heat in my projector?

The lamp draws 200 W, matching the original specification. Brightness and heat output stay identical to the factory lamp, so image performance and cooling requirements do not change.

Does the lamp use a standard UHP interface and are there any power limits?

It uses a UHP lamp with the same connector and voltage as the original EP716/719 module. The 200 W rating is the fixed power limit; the projector's ballast regulates ignition and run current automatically.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.