We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New Optoma TX610ST projector lamp module with 230W bulb in housing

OPTOMA

OPTOMA TX610ST projector lamp 230W

SKU CH-X0B0-4V3PA

A 230W replacement lamp module with housing delivers 3,000 hours normal or 4,000 hours economy life for the TX610ST projector

  • TypeProjector Lamp
  • Wattage230W
  • Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
  • Genuine compatible replacement with new 230W P-VIP bulb
  • Ready-to-install module includes housing for quick projector maintenance
  • 3000 hours normal mode extends usable projection time
  • Economy mode delivers up to 4000 hours of lamp life
  • Manufactured to ISO 9001 quality standards for reliable performance

Genuine Compatible Replacement Lamp

The OPTOMA TX610ST projector lamp is a new 230W replacement module that includes a P-VIP bulb and housing assembled together. It is designed for users who need a ready-to-install light source for their Optoma projector without separate component handling.

Upgrade from a dim or expired original lamp

This unit replaces the factory lamp when brightness has faded or the rated hours have been reached. The jump is worth it when the projector shows reduced image quality or a lamp warning after approximately 3000 hours in normal mode or 4000 hours in economy mode.

Simple housing swap with quality assurance

Installation consists of removing the old module and inserting the new one because the bulb is already secured in its housing. Each lamp is built to ISO9001 standards and tested for beam performance, ignition, voltage, appearance, connections and run-time to minimise the risk of early failure or fitment issues.

Highlights

  • Genuine compatible replacement with new 230W P-VIP bulb
  • Ready-to-install module includes housing for quick projector maintenance
  • 3000 hours normal mode extends usable projection time
  • Economy mode delivers up to 4000 hours of lamp life
  • Manufactured to ISO 9001 quality standards for reliable performance

Specifications

TypeProjector Lamp
Wattage230W
Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.

Questions about this item

Does the SP.8JQ01GC01 module come pre-assembled in its housing so I can slide it straight into the TX610ST projector?

Yes, the lamp ships as a complete 230 W bulb-and-housing unit ready for direct insertion into the Optoma TX610ST.

What is the correct sequence for replacing the lamp, and which step do users most often miss?

Power off and unplug the projector, let it cool completely, remove the lamp cover, release the retaining screws, pull out the old module, insert the new SP.8JQ01GC01, tighten the screws, replace the cover, then reset the lamp-hour counter in the menu — the reset is the step most often forgotten.

When should I plan to replace this 230 W P-VIP lamp again?

Expect roughly 3000 hours in normal mode or 4000 hours in economy mode before a new lamp module is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.