OPTOMA
OPTOMA TX551 projector lamp 180W 5000 6000 hrs
Replacement lamp module with 180W Osram P-VIP bulb and housing, rated for 5000 to 6000 hours
- TypeProjector Lamp
- Wattage180W
- Lamp Life5,000 (Normal) - 6,000 (Economy) Hrs.
- Ready-to-install module with bulb and housing
- 180W Osram P-VIP bulb delivers rated brightness
- 5000 hours normal mode extends replacement interval
- 6000 hours economy mode reduces running cost
- Manufactured to ISO9001 quality standards
Ready-to-install replacement lamp
This 180W replacement module combines a new Osram P-VIP bulb with its housing for immediate installation in compatible Optoma projectors. The assembly arrives fully assembled so no extra tools or alignment steps are required. It restores original brightness and colour performance without modification.
Rated life and thermal behaviour
Normal mode delivers 5000 hours of operation while economy mode extends that to 6000 hours by reducing lamp power and heat output. Lower heat in economy mode also means quieter fan operation during typical viewing sessions. The 180W rating defines the thermal load the projector cooling system must handle.
Consistent output over the full cycle
The lamp maintains stable ignition voltage and beam performance from first use through the rated 5000 or 6000 hour span. ISO9001 manufacturing checks verify run-time consistency so brightness does not decay prematurely under sustained operation. Economy mode further reduces thermal stress during extended presentations.
Highlights
- Ready-to-install module with bulb and housing
- 180W Osram P-VIP bulb delivers rated brightness
- 5000 hours normal mode extends replacement interval
- 6000 hours economy mode reduces running cost
- Manufactured to ISO9001 quality standards
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 180W |
| Lamp Life | 5,000 (Normal) - 6,000 (Economy) Hrs. |
Questions about this item
How do I install the TX551 lamp module and what step do people skip?
Power off and unplug the projector, let it cool completely, remove the lamp cover, unscrew the old module, insert the new TX551 housing until it seats firmly, tighten the screws, replace the cover, then reset the lamp timer in the menu — skipping the timer reset makes the projector think the old lamp is still fitted.
What maintenance or replacement will the TX551 lamp need later?
The lamp itself is the only replaceable part; after 5,000 hours in Normal mode or 6,000 hours in Economy mode the brightness drops and the module must be swapped for a new TX551 unit — no filters or other consumables belong to this lamp.
What limit appears first during sustained use of the TX551 lamp?
The 5,000-hour Normal-mode rating is the first hard limit; running continuously in Normal mode reaches that threshold before the 6,000-hour Economy rating, so the lamp must be replaced once the timer hits 5,000 hours.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



