OPTOMA
OPTOMA TW7755 projector lamp 330W Osram P-VIP
Replacement 330 W lamp module with Osram P-VIP bulb and housing, rated 2,000 normal or 3,000 economy hours
- TypeProjector Lamp
- Wattage330W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with 330 W Osram P-VIP bulb
- Up to 3000 hours lamp life in Economy mode
- 2000 hours rated life in Normal brightness mode
- Built to ISO 9001 quality standards
- Genuine OEM replacement for Optoma TW7755 projectors
Direct-fit Optoma TW7755 replacement
This 330W projector lamp module fits Optoma projectors that use the TW7755 designation. It arrives as a complete bulb-and-housing assembly so installers can swap the old unit without handling a bare burner. The lamp targets venues that need a straight swap rather than a bare-bulb rebuild.
Osram P-VIP burner in ISO 9001 housing
An Osram P-VIP 330W bulb is mounted inside a factory-assembled housing that has passed ISO 9001 quality checks for beam performance, ignition voltage, connections and run-time. The pre-aligned housing eliminates the alignment step that bare-bulb replacements require. Buyers who prefer to reuse their existing housing and install only a bare burner cannot use this module.
2 000 to 3 000 hour service window
Rated life spans 2 000 hours in normal mode and 3 000 hours in economy mode, after which brightness drops and replacement is due. The fixed 330W power draw means the projector’s cooling and power supply must already support that load. Users who need longer intervals between lamp changes will not find that capability in this unit.
Highlights
- Ready-to-install module with 330 W Osram P-VIP bulb
- Up to 3000 hours lamp life in Economy mode
- 2000 hours rated life in Normal brightness mode
- Built to ISO 9001 quality standards
- Genuine OEM replacement for Optoma TW7755 projectors
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 330W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
What projector model does the TW7755 lamp module fit?
The TW7755 lamp module is built for Optoma projectors that use the BL-FP330B part number and ships as a complete bulb-and-housing assembly.
How is the 330 W lamp secured inside the projector?
The pre-assembled housing slides into the lamp compartment and locks with the projector's retaining screws; no separate bulb handling is required.
Which step do installers most often skip when fitting this lamp?
Resetting the lamp-hour counter in the projector menu after installation; without it the projector will still show the old lamp's usage time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



