We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Optoma projector lamp module SP.81C01.001 with 250W UHP bulb in housing

OPTOMA

Optoma SP.81C01.001 projector lamp 250W 2000 Hrs

SKU CH-Q4YD-ANYZH

A 250 W UHP lamp module rated for 2,000 hours, supplied as a complete housing for quick projector replacement

  • TypeProjector Lamp
  • Wattage250W
  • Lamp Life2,000 Hrs.
  • Ready to install with pre-assembled housing
  • 250W UHP bulb delivers 2000 hours runtime
  • OEM-grade quality from Philips Osram Ushio or Phoenix
  • ISO9001 manufacturing with beam and ignition testing
  • New condition ensures full 2000 hour lamp life

Ready-to-install replacement module

The Optoma SP.81C01.001 is a new projector lamp module that combines a 250W UHP bulb with its housing in a single unit. It is intended for owners of compatible Optoma projectors who need a direct replacement without separate bulb handling.

Assembled housing simplifies maintenance

The lamp ships fully assembled so the installer only needs to swap the complete module rather than fit a bare bulb into an existing cage. Manufacturing follows ISO9001 quality checks covering beam performance, ignition, voltage, appearance, connections and run-time.

Fixed 2,000-hour rated life

The UHP lamp is rated for 2,000 hours of operation before replacement is required. Users needing longer intervals between changes or higher brightness output will need to consider different projector models or lamp designs not covered by this module.

Highlights

  • Ready to install with pre-assembled housing
  • 250W UHP bulb delivers 2000 hours runtime
  • OEM-grade quality from Philips Osram Ushio or Phoenix
  • ISO9001 manufacturing with beam and ignition testing
  • New condition ensures full 2000 hour lamp life

Specifications

TypeProjector Lamp
Wattage250W
Lamp Life2,000 Hrs.

Questions about this item

What connector standard does the SP.81C01.001 lamp use to connect to the projector?

The lamp module plugs directly into the projector's dedicated lamp socket; no separate cable or interface standard is involved.

What physical space and mounting points does the SP.81C01.001 require inside the projector?

It is a complete housing assembly sized to match the original Optoma lamp cavity and secures with the projector's existing screws.

What is the correct installation sequence for the SP.81C01.001, and which step is most often missed?

Power off and cool the projector, open the lamp door, remove the old module, insert the new one until it seats firmly, replace the door, then reset the lamp timer in the menu.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.