We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular projector lamp module with integrated housing and 230W UHP bulb

OPTOMA

OPTOMA OP578 230W Projector Lamp 2000 Hrs

SKU CH-GWHV-ZDB66

A 230 W replacement lamp module with bulb and housing pre-assembled for quick fitting, rated for 2,000 hours of use

  • TypeProjector Lamp
  • Wattage230W
  • Lamp Life2,000 Hrs.
  • Genuine compatible replacement fits Optoma projectors directly
  • 230W UHP bulb delivers bright, consistent output
  • 2000-hour lamp life supports extended use
  • Pre-assembled housing enables quick, tool-free installation
  • Manufactured to ISO 9001 quality standards

Optoma OP578 230W projector lamp

The Optoma OP578 is a genuine compatible replacement lamp module for select Optoma projectors. It arrives as a fully assembled 230W UHP bulb inside its housing, ready for straightforward installation. This new lamp restores original brightness and colour performance for home cinema, classroom or meeting-room projection. Buyers needing a different wattage or a bare bulb without housing should look elsewhere.

Thermals noise and power draw

The lamp operates at its rated 230 watts, drawing that power consistently during normal projection. Cooling is handled by the projector's internal fan system; the module itself adds no moving parts or additional noise. Expected lamp life is 2,000 hours under typical use before brightness drops to half. Users who require longer rated life or lower power consumption will need a different lamp design.

230W UHP lamp with 2000-hour rating

The single specification that determines fit is the 230W UHP lamp rated for 2,000 hours, matching the projector's original lamp code SP.88R01G.C01. Verify that your Optoma model lists this exact part number before ordering. Projectors requiring a different wattage, connector or lamp code cannot use this module.

Highlights

  • Genuine compatible replacement fits Optoma projectors directly
  • 230W UHP bulb delivers bright, consistent output
  • 2000-hour lamp life supports extended use
  • Pre-assembled housing enables quick, tool-free installation
  • Manufactured to ISO 9001 quality standards

Specifications

TypeProjector Lamp
Wattage230W
Lamp Life2,000 Hrs.

Questions about this item

How do I install the OP578 lamp module, and which step do people often get wrong?

The OP578 ships as a fully assembled 230W bulb and housing, so you only need to remove the old module and slide the new one in until it clicks; the step people miss is forgetting to reset the projector’s lamp-hour counter after installation.

What maintenance or replacement will the OP578 lamp need later?

The UHP 230W bulb is rated for 2,000 hours of use; once that limit is reached you simply replace the entire OP578 module again — no separate filter or bulb-only change is required.

What limit shows up first under sustained use of the OP578 lamp?

The 2,000-hour rated lamp life is the first limit you will hit; after those hours the 230W UHP bulb’s output drops off and the module must be swapped out.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.