OPTOMA
OPTOMA OP260ST Projector Lamp 230W
A 230 W replacement lamp module with 3,000 to 4,000 hours rated life, supplied fully assembled for direct installation
- TypeProjector Lamp
- Wattage230W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Genuine Philips P-VIP 230W bulb inside
- Ready-to-install housing saves setup time
- 3,000 hours normal or 4,000 hours economy life
- Built to ISO 9001 quality standards
- New condition ensures full rated performance
Direct Replacement Lamp
The OPTOMA OP260ST is a new 230W projector lamp module that ships as a fully assembled bulb and housing. It is designed for owners of compatible Optoma projectors who need a drop-in replacement without separate component assembly.
230W P-VIP Bulb
The lamp uses a Philips P-VIP 230W bulb rated for 3,000 hours in normal mode and 4,000 hours in economy mode. Matching this wattage and lamp type to the projector's original specification is the single factor that determines correct operation.
Simple Module Swap
Because the bulb comes pre-installed in its housing, installation only requires opening the projector's lamp door, removing the old module, and inserting the new one. The most common issue is forgetting to reset the projector's lamp hour counter after replacement, which can trigger premature replacement warnings.
Highlights
- Genuine Philips P-VIP 230W bulb inside
- Ready-to-install housing saves setup time
- 3,000 hours normal or 4,000 hours economy life
- Built to ISO 9001 quality standards
- New condition ensures full rated performance
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 230W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
How long will the 230 W lamp last in normal and economy modes?
The lamp is rated for 3,000 hours in normal mode and 4,000 hours in economy mode before brightness drops to half its original level.
Does this lamp module use a standard projector lamp interface or a proprietary connector?
The module is a complete housing assembly built to the Optoma OP260ST (SP.8JA01GC01) specification, so it plugs directly into the projector's original lamp socket without adapters.
What physical space or mounting points does the OP260ST lamp require inside the projector?
It is a self-contained housing designed to fit the exact lamp cavity and screw locations of compatible Optoma projectors, requiring no extra brackets or modifications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



