We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Optoma OP-X2800 projector lamp module with 185W UHP bulb in black housing

OPTOMA

Optoma OP-X2800 Projector Lamp 185W

SKU CH-H7G7-5062Y

A 185 W replacement projector lamp module with housing, rated for 2,000 to 3,000 hours of use

  • TypeProjector Lamp
  • Wattage185W
  • Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
  • Ready-to-install module saves setup time
  • Philips UHP 185W bulb delivers original brightness
  • 2,000 hours normal life extends replacement cycle
  • 3,000 hours economy mode reduces running cost
  • ISO 9001 manufacturing ensures consistent quality

Optoma OP-X2800 replacement lamp

The Optoma OP-X2800 is a 185W projector lamp module supplied as a fully assembled bulb and housing. It is designed for owners of compatible Optoma projectors who need a direct replacement without separate component fitting.

Build quality and daily handling

Each unit is manufactured to ISO9001 standards and tested for beam performance, ignition, voltage, appearance, connections and run-time. The pre-assembled housing means the lamp slots straight into the projector, reducing installation time and avoiding contact with the bare bulb.

Thermals, noise and power

The lamp draws 185W and is rated for 2,000 hours in normal mode or 3,000 hours in economy mode. Economy operation lowers power consumption and heat output, which in turn reduces fan noise during extended viewing sessions.

Highlights

  • Ready-to-install module saves setup time
  • Philips UHP 185W bulb delivers original brightness
  • 2,000 hours normal life extends replacement cycle
  • 3,000 hours economy mode reduces running cost
  • ISO 9001 manufacturing ensures consistent quality

Specifications

TypeProjector Lamp
Wattage185W
Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.

Questions about this item

What projector models accept the OP-X2800 lamp module?

The OP-X2800 module is built for Optoma projectors that specify the SP.8EH01GC01 part number; check your projector manual to confirm it lists this exact module before ordering.

Does the lamp ship with a housing, or must I reuse the old cage?

It arrives as a fully assembled unit that includes a new Philips UHP 185 W bulb already seated in its housing, so no cage reuse or separate bulb handling is required.

What is the correct sequence for fitting the OP-X2800 lamp, and which step is most often missed?

Power off the projector and let it cool completely, remove the lamp cover, unscrew the old module, insert the new OP-X2800 unit until it clicks, tighten the retaining screws, replace the cover, then reset the lamp-hour counter in the on-screen menu — the counter reset is the step most frequently forgotten.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.