OPTOMA
OPTOMA NOBO X23M projector lamp 200W 2000 Hrs
A 200 W Phoenix SHP OEM replacement lamp module rated for 2 000 hours of projector use
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 Hrs.
- Ready-to-install module saves setup time
- 200 W Phoenix SHP bulb delivers specified brightness
- 2,000-hour rated life reduces replacement frequency
- Manufactured to ISO 9001 quality standards
- OEM-compatible fit for Optoma NOBO X23M projectors
Replacement lamp for Optoma projectors
The NOBO X23M module is a new 200W projector lamp supplied as a complete bulb-and-housing assembly. It matches Optoma part number SP.80N01.001 and is built to ISO 9001 quality standards for direct installation in compatible Optoma projectors.
Thermal output and rated life
The lamp draws 200W and is rated for 2,000 hours of operation under normal use. A Phoenix SHP bulb provides the light source, and the unit is tested for ignition, voltage stability and run-time before shipping.
2,000-hour rated lamp life
This single figure determines whether the module fits your maintenance cycle; projectors requiring a different rated life will need an alternative lamp. Buyers who need a longer or shorter rated life should verify the projector’s specification before ordering.
Highlights
- Ready-to-install module saves setup time
- 200 W Phoenix SHP bulb delivers specified brightness
- 2,000-hour rated life reduces replacement frequency
- Manufactured to ISO 9001 quality standards
- OEM-compatible fit for Optoma NOBO X23M projectors
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 200W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How do I install the Optoma NOBO X23M lamp module, and what step do people often miss?
The module arrives as a fully assembled bulb and housing ready to fit. The step often missed is resetting the projector's lamp-hour counter after installation so the new 2,000-hour rating is tracked correctly.
What maintenance or replacement will the Optoma NOBO X23M lamp need later?
The Phoenix SHP 200W bulb is rated for 2,000 hours of use. Once that runtime is reached you replace the entire lamp module; no separate filter or component servicing is required for this unit.
What limit appears first during sustained use of the Optoma NOBO X23M lamp?
The 2,000-hour lamp-life rating is the primary limit. After those hours the 200W bulb's brightness and ignition reliability decline, so a full module swap becomes necessary.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



