OPTOMA
OPTOMA HD67 projector lamp 185W
Replacement lamp module with 185W UHP bulb and housing, rated for 2000 normal or 3000 economy hours
- TypeProjector Lamp
- Wattage185W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- 185W Philips UHP lamp powers bright projection
- Up to 3,000 hours life in economy mode
- Built to ISO 9001 quality standards
- OEM replacement for Optoma HD67 projectors
Optoma HD67 projector lamp 185W
This 185W replacement lamp module fits the Optoma HD67 projector and arrives as a fully assembled bulb and housing for direct installation. It is intended for owners of that specific projector model who need a new light source. Buyers with different projector models or those seeking bare bulbs without a housing will not find this part suitable.
185W UHP lamp specification
The lamp uses a Philips UHP bulb rated at 185W, which is the single specification that determines compatibility with the HD67 projector. Matching this wattage and bulb type ensures the correct electrical and optical characteristics for the unit. If your projector requires a different wattage or lamp technology this module will not operate correctly.
Lamp life under sustained use
Rated life spans 2000 hours in normal mode and 3000 hours in economy mode, reflecting performance under continuous operation rather than brief cycles. Economy mode reduces brightness to extend the interval between replacements. Actual longevity will vary with usage patterns and environmental conditions.
Highlights
- Ready to install with pre-assembled bulb and housing
- 185W Philips UHP lamp powers bright projection
- Up to 3,000 hours life in economy mode
- Built to ISO 9001 quality standards
- OEM replacement for Optoma HD67 projectors
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 185W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
How bright will the 185W UHP bulb be once installed in my Optoma HD67?
The 185-watt UHP lamp restores the projector to its original light output, matching the factory brightness specification for the HD67.
Does the lamp module use a standard connector that fits the HD67 without adapters?
Yes, the fully assembled housing plugs directly into the Optoma HD67 lamp compartment with the original connector.
What clearance does the housing need inside the projector chassis?
The module is built to the exact dimensions of the original Optoma SP.8EH01GC01 lamp, so it seats in the existing bay without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



