OPTOMA
OPTOMA EX610STc projector lamp 230W
A 230W replacement lamp module with housing for easy installation, rated 3,000 hours normal and 4,000 hours economy life
- TypeProjector Lamp
- Wattage230W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Ready to install with assembled housing
- 230W P-VIP bulb delivers reliable brightness
- 3000 hours normal life or 4000 hours economy
- Manufactured to ISO 9001 quality standards
- Tested for beam performance ignition voltage and run-time
Exact-fit replacement
The OPTOMA EX610STc projector lamp is a 230 W replacement module built with a new Philips P-VIP bulb inside a complete housing. It is designed for users who need a direct, ready-to-install swap for the original lamp in their Optoma projector without additional assembly.
Thermals and power
The lamp draws 230 W during operation and is rated for 3000 hours in normal mode or 4000 hours in economy mode. Running the projector in economy mode reduces brightness and heat output, extending the interval between replacements while keeping fan noise lower.
Build integration
The assembled housing slides into the projector's lamp compartment with no extra tools or cables required. Buyers who need a bare bulb without housing or who require a different wattage for another model should look elsewhere, as this module is specific to the EX610STc series.
Highlights
- Ready to install with assembled housing
- 230W P-VIP bulb delivers reliable brightness
- 3000 hours normal life or 4000 hours economy
- Manufactured to ISO 9001 quality standards
- Tested for beam performance ignition voltage and run-time
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 230W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
How is the SP.8JA01GC01 lamp module installed, and what step do people often miss?
The unit ships as a fully assembled 230W bulb and housing, so you only need to open the projector's lamp door, remove the old module, insert the new one until it seats firmly, then close the door and reset the lamp-hour counter in the menu; skipping the counter reset is the common mistake.
What maintenance or replacement will this lamp need later?
The 230W P-VIP bulb is rated for 3000 hours in Normal mode or 4000 hours in Economy mode; after that the lamp must be replaced with a new module, and the projector's air filters should be cleaned periodically to maintain airflow.
What limit appears first during sustained use of this 230W lamp?
The rated lamp life of 3000 hours in Normal mode or 4000 hours in Economy mode is the primary limit; brightness will gradually decline until the projector indicates a replacement is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



