OPTOMA
OPTOMA EX536L Projector Lamp 185W
185W UHP projector lamp module with 2,000 to 3,000 hour life for Optoma EX536L
- TypeProjector Lamp
- Wattage185W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- New Philips UHP 185W bulb for bright projection
- Ready-to-install module with housing for quick replacement
- Up to 3000 hours lamp life in Economy mode
- Manufactured to ISO9001 quality standards for reliability
- Compatible with Optoma EX536L projector model
Compatible projector lamp module
The OPTOMA EX536L is a replacement lamp module supplied new and fully assembled with bulb and housing. It fits Optoma projectors that specify the EX536L part number and is ready for direct installation without extra parts.
185 W UHP lamp specification
The module uses a 185 W Philips UHP bulb, which is the single specification that determines whether the lamp matches the projector's original power and ignition requirements. Using a lamp of a different wattage will cause compatibility and safety issues.
Rated lamp life and headroom
In normal mode the lamp is rated for 2,000 hours and in economy mode for 3,000 hours, giving extended operation for typical classroom or meeting-room schedules. Economy mode reduces brightness to reach the longer figure, so users needing maximum output will reach the limit sooner.
Highlights
- New Philips UHP 185W bulb for bright projection
- Ready-to-install module with housing for quick replacement
- Up to 3000 hours lamp life in Economy mode
- Manufactured to ISO9001 quality standards for reliability
- Compatible with Optoma EX536L projector model
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 185W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
What does the 185W rating mean once the lamp is inside my Optoma projector?
It is the power the lamp draws during operation; the projector's ballast and cooling are designed for this exact wattage so brightness and lamp life match the original specification.
What interface or standard does the SP.8EH01GC01 module use, and what does it cap in practice?
The lamp connects through the projector's proprietary socket; the 185W rating caps the maximum power the ballast will supply, preventing overdrive.
What does the unit physically need to fit or mount in the projector?
It arrives as a fully assembled bulb-and-housing module that slides into the lamp compartment and secures with the existing screws — no extra brackets or adapters required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



