OPTOMA
OPTOMA EW674N 280W projector lamp
Genuine compatible replacement lamp module with a new 280W UHP bulb and housing, rated for 2,000 hours of use
- TypeProjector Lamp
- Wattage280W
- Lamp Life2,000 Hrs.
- Genuine 280W UHP bulb delivers bright projection
- 2,000-hour lamp life reduces replacement frequency
- Pre-assembled housing enables quick tool-free installation
- Manufactured to ISO 9001 quality standards
- Compatible with Optoma EW674N projector models
Genuine Optoma 280W Replacement Lamp
This genuine compatible replacement lamp module fits Optoma projectors requiring the EW674N model. It ships fully assembled with a new 280W UHP bulb inside its housing, so installation is a straightforward swap. The lamp is rated for 2,000 hours of operation and is built to ISO 9001 quality standards. It suits owners of compatible Optoma projectors who need a ready-to-install light source.
Suits owners of compatible Optoma models
The module is designed for users whose projector specifies the EW674N or BL-FP280A part number. It is not for owners of projectors that require a different lamp code or wattage. Buyers who need a higher-brightness or longer-life alternative should look at other options. Anyone unsure of their projector's exact lamp requirement should verify the model before ordering.
280W UHP bulb rated for 2,000 hours
The single specification that decides fit is the 280W UHP bulb rated for 2,000 hours. This wattage and life rating must match the projector's original lamp specification for correct operation. If the projector calls for a different wattage or life rating, this module will not be suitable. Confirm the required wattage and hour rating against your projector's documentation.
Highlights
- Genuine 280W UHP bulb delivers bright projection
- 2,000-hour lamp life reduces replacement frequency
- Pre-assembled housing enables quick tool-free installation
- Manufactured to ISO 9001 quality standards
- Compatible with Optoma EW674N projector models
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 280W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How do I install the BL-FP280A module and which step do people skip?
The lamp ships as a fully assembled bulb and housing; the step often missed is resetting the projector's lamp-hour counter after fitting the new module.
What maintenance or replacement will the 280W UHP lamp need later?
The lamp is rated for 2,000 hours of use; once that limit is reached the entire module must be replaced because the bulb cannot be serviced separately.
What limit appears first during sustained use of the 280W lamp?
The 2,000-hour rated life is the primary limit; after those hours brightness drops and the projector will prompt for a new lamp.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



