OPTOMA
OPTOMA ES628 Projector Lamp 200W Osram UHP
200 W projector lamp with Osram UHP bulb rated for 3,000 hours normal or 4,000 hours economy mode
- TypeProjector Lamp
- Wattage200W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Ready for easy installation with fully assembled bulb and housing
- 200W Osram UHP lamp delivers reliable brightness
- Up to 4,000 hours lamp life in Economy mode
- Manufactured to ISO 9001 quality standards
- OEM replacement module fits Optoma ES628 projectors
Direct replacement for Optoma projectors
The ES628 lamp module fits Optoma projectors that use the SP.89M01GC01 part number. It arrives as a complete 200W Osram UHP bulb inside its housing, so installers can swap the old unit without handling a bare lamp.
Rated output and typical running time
The 200W UHP lamp delivers 3000 hours of service in normal mode and extends to 4000 hours when the projector runs in economy mode. Power draw and thermal load match the original specification, keeping fan noise and heat at the levels the projector was designed for.
Pre-assembled housing simplifies maintenance
Because the bulb is already seated in its cage, alignment is fixed and there is no need to touch the glass envelope. Each unit is built to ISO9001 quality checks covering ignition, voltage, beam performance and run-time, so the module seats cleanly and locks into the projector’s existing latch points.
Highlights
- Ready for easy installation with fully assembled bulb and housing
- 200W Osram UHP lamp delivers reliable brightness
- Up to 4,000 hours lamp life in Economy mode
- Manufactured to ISO 9001 quality standards
- OEM replacement module fits Optoma ES628 projectors
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 200W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
How do I install the ES628 lamp module in my Optoma projector?
The ES628 arrives as a fully assembled 200W Osram UHP bulb inside its housing. Power off and unplug the projector, let it cool, remove the old lamp cage, insert the new module until it seats firmly, then secure the retaining screws before restoring power.
When will the ES628 lamp need replacement?
Expect about 3000 hours in Normal mode or 4000 hours in Economy mode before brightness drops to half. The projector's lamp-hour counter tracks usage; plan a new module when you approach those limits.
What is the first limit I will hit during long sessions with the ES628?
The 200W UHP lamp generates significant heat, so the projector's thermal protection will trigger first if ventilation is restricted. Keep intake and exhaust vents clear and clean the air filters regularly to avoid premature shutdowns.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



