OPTOMA
OPTOMA ES522 projector lamp 180W 3000/4000 hrs
A genuine compatible 180 W replacement lamp module with 3000 to 4000 hour life for Optoma projectors
- TypeProjector Lamp
- Wattage180W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Genuine compatible replacement lamp ready for easy installation
- 180W P-VIP bulb delivers reliable brightness
- 3000 hours normal mode extends usage time
- 4000 hours economy mode reduces replacement frequency
- Manufactured to ISO 9001 quality standards
Genuine Replacement Lamp
The Optoma ES522 projector lamp module is a new 180W P-VIP bulb pre-fitted into its housing for immediate installation. It restores original brightness to compatible Optoma projectors without the need for separate lamp-and-cage assembly.
Upgrade From Dim or Failed Lamps
This module replaces an ageing or expired lamp when image brightness has faded or the projector refuses to start. The jump is worth it when the existing lamp has reached or exceeded its rated hours and a reset of the hour counter is required.
Sustained Operation Characteristics
In normal mode the lamp is rated for 3000 hours and in economy mode for 4000 hours before brightness drops to half its initial output. Manufactured to ISO 9001 standards, each unit is tested for ignition reliability, voltage stability and run-time consistency under continuous use.
Highlights
- Genuine compatible replacement lamp ready for easy installation
- 180W P-VIP bulb delivers reliable brightness
- 3000 hours normal mode extends usage time
- 4000 hours economy mode reduces replacement frequency
- Manufactured to ISO 9001 quality standards
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 180W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
What projector models accept the ES522 180W lamp module?
The ES522 lamp module fits Optoma projectors that use the BL-FP180D part number; check your projector manual to confirm compatibility before purchase.
How do I install the ES522 lamp and what step is often missed?
Power off and unplug the projector, let it cool completely, remove the lamp cover, unscrew the old module, insert the new ES522 unit firmly until seated, replace screws and cover, then reset the lamp timer in the menu — skipping the timer reset is the common error.
When should I replace the ES522 lamp and what does it involve?
Replace the lamp after roughly 3000 hours in normal mode or 4000 hours in economy mode when brightness drops; replacement means buying a new ES522 module and repeating the installation steps.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



