We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Optoma EP759 projector lamp module with housing, new condition

OPTOMA

Optoma EP759 projector lamp 300W SP.89601.001

SKU CH-QWBF-BJ00P

A 300 W replacement lamp module for the Optoma EP759, with a Philips SHP bulb and housing, rated for 2,000 normal or 3,000 economy hours

  • TypeProjector Lamp
  • Wattage300W
  • Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
  • Ready-to-install module with genuine Philips 300 W bulb
  • Up to 3 000 hours life in Economy mode
  • Built to ISO 9001 quality standards
  • Tested for beam performance, ignition and run-time
  • Exact fit for Optoma EP759 projectors (SP.89601.001)

Optoma EP759 Replacement Lamp Module

The Optoma EP759 is a new 300W projector lamp module supplied as a fully assembled bulb and housing. It carries the manufacturer part number SP.89601.001 and uses a Philips SHP bulb. The unit is ready for direct installation in compatible Optoma projectors without additional assembly.

For Users Needing a Direct-Fit 300W Replacement

This lamp suits owners of Optoma projectors that specify the EP759 or SP.89601.001 module and who want a plug-in replacement with a genuine Philips SHP bulb. It is not for buyers whose projectors require a different wattage, connector or housing design, nor for those seeking a bare bulb without the housing.

Rated Life of 2000 Hours Normal / 3000 Hours Economy

The lamp is rated for 2,000 hours in normal mode and 3,000 hours in economy mode. This single figure determines how long the projector can run before brightness drops to half and the module must be replaced. Match this rating to your usage pattern to confirm suitability.

Highlights

  • Ready-to-install module with genuine Philips 300 W bulb
  • Up to 3 000 hours life in Economy mode
  • Built to ISO 9001 quality standards
  • Tested for beam performance, ignition and run-time
  • Exact fit for Optoma EP759 projectors (SP.89601.001)

Specifications

TypeProjector Lamp
Wattage300W
Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.

Questions about this item

Which Optoma projector models accept the EP759 lamp with part number SP.89601.001?

The EP759 lamp module is built for Optoma projectors that specify part number SP.89601.001; check your projector’s manual or service label for that exact part number before purchasing.

Will the 300W EP759 lamp run in a projector that originally used a lower-wattage module?

The lamp is rated at 300W and must only be installed in projectors designed for that wattage; using it in a unit built for a different power rating can cause damage or failure to ignite.

How can I confirm the EP759 lamp is operating correctly after installation?

After fitting the lamp, reset the projector’s lamp-hour counter; the unit should strike reliably, show a stable image, and accumulate hours toward the 2000-hour normal or 3000-hour economy ratings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.