OPTOMA
OPTOMA EP680 projector lamp 250W 2000 hrs
Complete 250W NSH lamp module with housing for 2000 hours of projection
- TypeNSH
- Wattage250W
- Lamp Life2,000 hrs
- Ready-to-install module with new Ushio NSH 250W bulb
- 2,000-hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and voltage
- Direct-fit replacement for Optoma EP680 projectors
Optoma EP680 Lamp Module
This Optoma EP680 lamp module fits projectors that require the SP.80701.001 part. It arrives as a fully assembled bulb and housing so the projector can be back in service quickly. Buyers who need a different wattage or a bare bulb without housing should look elsewhere.
250W NSH Bulb Specification
The lamp uses a new Ushio NSH bulb rated at 250W with a rated life of 2,000 hours. That wattage and lamp type are the single specification that determines whether this module matches the projector’s original requirements. If the projector calls for a different wattage or lamp technology this unit will not be suitable.
Simple Housing Swap
Installation consists of removing the old lamp housing and inserting the new module until it seats firmly. The most common issue is forgetting to reset the projector’s lamp-hour counter after replacement, which leaves the replacement warning active. Another frequent problem is touching the bulb glass with bare fingers, which can shorten the lamp’s lifespan.
Highlights
- Ready-to-install module with new Ushio NSH 250W bulb
- 2,000-hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and voltage
- Direct-fit replacement for Optoma EP680 projectors
Specifications
| Brand | OPTOMA |
|---|---|
| Type | NSH |
| Wattage | 250W |
| Lamp Life | 2,000 hrs |
Questions about this item
How long will the 250 W lamp last in my projector?
The lamp is rated for 2,000 hours of operation under normal use.
What lamp technology does the EP680 module use?
It uses an NSH-type bulb, which is the standard discharge technology for this Optoma model.
Will the EP680 lamp module fit straight into my Optoma projector?
Yes, it arrives as a complete housing assembly matched to Optoma part SP.80701.001 for direct installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



