OPTOMA
OPTOMA EH200ST Projector Lamp 190W Osram P-VIP
A 190 W Osram P-VIP lamp module rated for 5,000 hours normal or 6,000 hours economy use, supplied as a complete housing for quick replacement
- TypeProjector Lamp
- Wattage190W
- Lamp Life5,000 Hrs. (Normal) - 6,000 Hrs. (Economy)
- OEM Osram P-VIP bulb ensures original brightness and colour accuracy
- 190 W power rating matches the projector's designed output
- 5,000 hours normal life reduces replacement frequency
- 6,000 hours economy mode extends usable runtime
- Fully assembled housing allows tool-free installation in seconds
Direct replacement lamp
The Optoma EH200ST lamp module fits the short-throw projector of the same name and ships as a complete housing with a new 190W Osram P-VIP bulb inside. It is intended for schools, offices and home users who need to restore brightness without sourcing a bare bulb.
Upgrade from a dimming original
When the factory lamp reaches the end of its rated 5,000 hours in normal mode or 6,000 hours in economy mode, image output drops and colours shift. Swapping in this module returns the projector to its original lumen level and colour balance.
Tool-free housing swap
The assembly slides into the projector lamp compartment after removing the access cover; no screws touch the bulb itself. The most common error is forgetting to reset the lamp-hour counter in the on-screen menu, which leaves the replacement warning active.
Highlights
- OEM Osram P-VIP bulb ensures original brightness and colour accuracy
- 190 W power rating matches the projector's designed output
- 5,000 hours normal life reduces replacement frequency
- 6,000 hours economy mode extends usable runtime
- Fully assembled housing allows tool-free installation in seconds
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 190W |
| Lamp Life | 5,000 Hrs. (Normal) - 6,000 Hrs. (Economy) |
Questions about this item
Does this lamp module include the housing so it fits directly into the Optoma EH200ST projector?
Yes, the module is supplied as a fully assembled 190 W Osram P-VIP bulb inside its housing, ready to slot into the Optoma EH200ST without extra parts.
What is the correct procedure to install the SP.8VH01GC01 lamp and which step do users often miss?
Power off and unplug the projector, let it cool, remove the lamp cover, release the retaining screws, slide the old module out, insert the new one until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most often forgotten.
When will the 190 W Osram P-VIP bulb need replacement based on the rated lamp life?
The lamp is rated for 5,000 hours in normal mode or 6,000 hours in economy mode; plan replacement when the projector's lamp-hour counter approaches those figures.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MADE IN USA TONER toner cartridge for KIP 7170 103 2 x 400 gm black
- Black
- Compatible



