OPTOMA
Optoma DS330 Projector Lamp 190W P-VIP BL-FU190C
Replacement lamp module with 190W P-VIP bulb and housing rated for 4,500 normal or 10,000 economy hours
- TypeProjector Lamp
- Wattage190W
- Lamp Life4,500 (Normal) - 10,000 (Economy) Hrs.
- 190 W P-VIP bulb powers bright projection
- 4,500 hours normal lamp life reduces replacements
- 10,000 hours economy mode extends usage
- Pre-assembled housing enables quick installation
- ISO 9001 manufacturing ensures consistent quality
DS330 Replacement Lamp Module
The Optoma DS330 lamp module (BL-FU190C) supplies a ready-to-install 190W P-VIP bulb inside its original housing. It fits the DS330 projector directly, so educators and small-business users can restore brightness without specialised tools or alignment steps.
190W P-VIP Thermal Profile
At 190 watts the lamp runs at a moderate power level that keeps fan noise low during typical classroom or meeting-room sessions. Economy mode extends the rated life to 10000 hours while reducing heat output further, letting the projector operate quietly through long presentations.
ISO9001 Quality Assurance
Every unit is tested to ISO9001 standards for beam performance, ignition voltage, connection integrity and run-time before it leaves the factory. Buyers who need a bare bulb without housing or who require a higher-wattage module for a different projector model should look elsewhere.
Highlights
- 190 W P-VIP bulb powers bright projection
- 4,500 hours normal lamp life reduces replacements
- 10,000 hours economy mode extends usage
- Pre-assembled housing enables quick installation
- ISO 9001 manufacturing ensures consistent quality
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 190W |
| Lamp Life | 4,500 (Normal) - 10,000 (Economy) Hrs. |
Questions about this item
How do I install the BL-FU190C lamp module in my Optoma DS330 projector, and what step do people often miss?
Remove the lamp cover, unscrew the old module, slide the new BL-FU190C housing in until it clicks, then tighten the screws and replace the cover. The step often missed is resetting the lamp-hour counter in the projector menu so the 4,500-hour normal-life timer starts from zero.
What maintenance or replacement will the BL-FU190C lamp need later?
The 190W P-VIP bulb is rated for 4,500 hours in normal mode or 10,000 hours in economy mode. When brightness drops or the projector warns you, replace the entire BL-FU190C module; no separate filter or bulb-only change is required.
What limit appears first during sustained use of the BL-FU190C lamp?
The 190W P-VIP bulb reaches its rated 4,500-hour normal-life limit before any other component. Running the projector in economy mode extends that limit to 10,000 hours, but the lamp-hour counter will still trigger replacement first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



