OPTOMA
OPTOMA DS325 BL-FP190A projector lamp 190W
190 W replacement lamp with Osram P-VIP bulb and housing rated for 4,500 normal or 6,500 economy hours
- TypeProjector Lamp
- Wattage190W
- Lamp Life4,500 (Normal) - 6,500 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- 190 W Osram P-VIP lamp delivers rated brightness
- 4,500 hours normal mode lamp life
- 6,500 hours economy mode extends replacement interval
- Manufactured to ISO 9001 quality standards
Replacement lamp for Optoma DS325
The BL-FP190A module delivers a 190W P-VIP bulb pre-mounted in its housing for direct installation in the Optoma DS325 projector. It is intended for owners who need a new light source without sourcing a bare bulb and fitting it themselves.
Rated output and usable life
The lamp runs at 190W and is rated for 4500 hours in normal mode or 6500 hours in economy mode. Brightness will gradually decline over that span, and the projector will require a fresh module once the rated hours are exceeded.
Supplied housing and quality checks
The unit arrives as a complete bulb-and-housing assembly, eliminating the need to handle a fragile bare lamp. Each module is tested to ISO9001 criteria for beam performance, ignition, voltage, appearance, connections and run-time before it ships.
Highlights
- Ready to install with pre-assembled bulb and housing
- 190 W Osram P-VIP lamp delivers rated brightness
- 4,500 hours normal mode lamp life
- 6,500 hours economy mode extends replacement interval
- Manufactured to ISO 9001 quality standards
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 190W |
| Lamp Life | 4,500 (Normal) - 6,500 (Economy) Hrs. |
Questions about this item
Will the 190 W DS325 lamp run in my older Optoma projector that originally shipped with a lower-wattage module?
The lamp is rated at 190 W and is built for the DS325 (BL-FP190A) chassis; using it in a projector designed for a different wattage can cause overheating or ignition failure, so match the part number exactly.
How can I confirm the new Osram P-VIP bulb is performing correctly after I install it?
Reset the projector’s lamp-hour counter, then verify the menu reports 0 hours and the image reaches full brightness without flicker; the module is tested for beam performance, ignition voltage and run-time before shipping.
Does the box contain only the bare bulb or a complete housing, and do I need any extra tools or cables?
The package includes a fully assembled 190 W bulb inside its housing ready for tool-free installation; no additional cables, drivers or mounting hardware are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



